Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, May 2002, p. 1246-1252, Vol. 46, No. 5
0066-4804/02/$04.00+0 DOI: 10.1128/AAC.46.5.1246-1252.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Protein Science Division, Department of Infectious Diseases,1 Department of Structural Biology, St. Jude Children's Research Hospital, Memphis, Tennessee 38105,3 Department of Molecular Sciences, University of Tennessee Health Science Center, Memphis, Tennessee 381632
Received 30 July 2001/ Returned for modification 29 October 2001/ Accepted 24 January 2002
|
|
|---|
|
|
|---|
Two natural products inhibit type II fatty acid synthesis by blocking the activity of one or more of the ß-ketoacyl-ACP synthases. Cerulenin is an irreversible inhibitor of the elongation class of condensing enzymes, ß-ketoacyl-ACP synthases I and II (FabB and FabF) (7, 19, 41), and forms a covalent adduct with the active-site cysteine (18). Cerulenin is not selective for type II systems because it is also a potent inhibitor of the condensation reaction catalyzed by the mammalian multifunctional (type I) fatty acid synthase (30, 31). However, cerulenin and related compounds have antineoplastic activity (22) and reduce food intake and body weight in mice (23), suggesting that this type of inhibitor may have utility in the treatment of human disorders of lipid metabolism. The structures of the FabF-cerulenin (27) and FabB-cerulenin (32) complexes show that the hydrophobic tail of the antibiotic slides into the substrate-binding tunnel and that the functional groups bind to the active-site histidines in a fashion that mimics the condensation transition state (32). Thiolactomycin (TLM) is a unique thiolactone that reversibly inhibits type II but not metazoan type I fatty acid synthase (11, 12). In contrast to cerulenin, TLM binds to the condensing enzyme active site in a mode that mimics the interaction of the enzyme with malonyl-ACP (32). TLM has a broad spectrum of activity against many pathogens (29). Also, the antibiotic is not toxic to mice and affords significant protection against urinary tract and intraperitoneal bacterial infections (26). TLM is active against gram-negative anaerobes associated with periodontal disease (10) and exhibits antimycobacterial action by virtue of its inhibition of mycolic acid synthesis (21, 39). TLM also has activity against malaria (42) and trypanosomes (28), thereby extending the potential for using this template as a platform for drug development.
Understanding the mechanisms of acquired resistance is important to the future development of TLM as an effective therapeutic agent. Spontaneous TLM resistance occurs at a high frequency in wild-type populations of Escherichia coli (16). A series of genetic and biochemical experiments demonstrated that these resistant isolates arose from mutations that inactivated the EmrR transcriptional repressor, thus increasing the expression of the EmrAB efflux pump in E. coli (8, 24). The intrinsic resistance of Pseudomonas aeruginosa to TLM is also attributed to active efflux of the antibiotic (37). The overexpression of FabB, accomplished through the introduction of the fabB gene on a multicopy plasmid, also confers TLM resistance (40); this finding directly illustrates that FabB is a relevant target for TLM in vivo. However, alterations in FabB expression or mutations in the fabB gene that lead to TLM resistance have not been discovered. In this report, we examine the efficacy of TLM for strains devoid of TolC-dependent type I secretory activity and use these strains to specifically select for missense mutations in the fabB gene that confer TLM resistance.
|
|
|---|
The bacterial strains used in this study were derivatives of E. coli K-12: strain UB1005 (metB1 relA1 spoT1 gyrA216
-
r F-) (2); strain CDM5 (emrR [Tlmr] metB1 relA1 spoT1 gyrA216
-
r F-) (16, 24); strain JT10 (metB1 relA1 spoT1 gyrA216
-
r F-) containing pFabB (40), which overexpresses FabB; strain ANS1 (metB1 relA1 spoT1 gyrA216 tolC::Tn10
-
r F-); and strain ANS6 (fabB390 metB1 relA1 spoT1 gyrA216 tolC::Tn10
-
r F-). Strain ANS1 was constructed by P1-mediated transduction of tolC::Tn10 in strain EP1581 into strain UB1005, followed by selection for tetracycline resistance. Strain ANS6 was obtained by selection for the growth of strain ANS1 on 24 µM TLM plates as described below. Plasmids were constructed by moving the XbaI-BamHI fragment of the His-tagged version of either the fabH or the fabB gene (14, 15) in pET-15b into pBluescript II KS(+), respectively.
Condensing enzyme assay. The FabB-FabF condensation assay was essentially the same as that described previously (9). Briefly, condensing enzymes assay mixtures contained 45 µM myristoyl-ACP, 50 µM [2-14C]malonyl-CoA, 100 µM ACP, 25 ng of FabD (malonyl transacylase), and condensing enzyme FabB, FabB(F390V), or FabF (0 to 50 ng) in a final volume of 40 µl. The mixtures were incubated at 37°C for 15 min, reduced with borohydride, extracted into toluene, and quantitated by scintillation counting. Assays were linear with time and protein. Protein content was determined with the Bradford assay (3).
Isolation of TLM-resistant fabB mutants. The sensitivity of strains to TLM was determined by spotting colonies onto rich agar plates containing geometrically increasing amounts of TLM. The MIC was reported as the concentration of TLM at which no bacterial growth was observed. Strain ANS1 was grown in rich broth in the absence of TLM, and approximately 107 cells were plated onto rich media containing 24, 48, and 96 µM TLM. A total of six independent colonies were obtained at a frequency of one colony per plate (four on plates containing 24 µM TLM and two on plates containing 48 µM TLM). The fabB gene (including the promoter region) was amplified from each of the six isolates by using primers EcFabB109F (5'-GATCTTAGCGATGTGTGTAAGG) and EcFabB1498R (5'-TCGGATGCGACGCTGGC). The fragments were cloned in plasmid pCR2.1 and sequenced by using the two primers listed above plus an internal primer, EcFabB566F (5'-GCGTTTCCAGGTGTTCGG). All isolates contained the same missense mutation. The mutated fabB gene in pCR2.1 was digested with AgeI and BamHI, and this fragment was transferred to a similarly digested FabB-pET-15b expression vector. The FabB(F390V) protein was expressed and purified by affinity chromatography as described previously (15).
Fatty acid analysis. Cultures (5 ml) of E. coli strains were grown to mid-log phase in M9 minimal medium (25) supplemented with 1% Casamino Acids (ICN), 0.4% glucose, 0.01% methionine, 0.0005% thiamine, and 10 µM ß-alanine and were harvested by centrifugation. The cell pellet was suspended in 1 ml of water, the lipids were extracted as described by Bligh and Dyer (1), and fatty acid methyl esters were prepared by the addition of 2 ml of HCl-methanol to the dry extract. The fatty acid methyl esters were fractionated by using a Hewlett-Packard model 5890 gas chromatograph equipped with a flame ionization detector and a glass column (internal diameter, 2 m by 4 mm) containing 3% SP2100-coated Supelcoport (100/120 mesh) and operated at 190°C. Fatty acid methyl esters were identified by comparing their retention times with those of standards (Matreya).
Structural modeling. The models of FabB(F390V) and FabB(F390L) were created from the coordinates of the binary complex of FabB-TLM (protein data bank ID 1FJ4). The binary complex was chosen because it is known that TLM induces conformational changes in the active site of the wild-type protein (32) that we think would likely be present in any complex of TLM with the mutant proteins. The amino acid subsitutions of valine and leucine for phenylalanine were made by using the program O (17), and the models, with TLM and water removed, were energy minimized by using the Kollman all-atom force field (38). Energy minimization was carried out by using the program Maximin2 within the Sybyl molecular modeling environment (SYBYL 6.7; Tripos Inc., St. Louis, Mo.). The binary complex of FabB(F390V)-TLM was made by using the same energy minimization software and the Tripos force field (5). Flexible docking with the program FlexX (33) was used to model the binding of TLM to FabB, FabB(F390V), and FabB(F390L). The initial position and conformation of TLM were chosen to place TLM outside the active site, near the entrance to the active-site tunnel. In all docking calculations, 30 solutions were requested, although for FabB(F390L), only 23 were found by FlexX.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. TLM, cerulenin, triclosan, and chloramphenicol resistance profiles for bacterial strainsa
|
We performed several additional experiments with the same protocol as that used to obtain resistant mutants of strain ANS1 by using TLM-resistant strain ANS6 as the starting point in an attempt to select for strains with higher levels of TLM resistance. We were unable to isolate colonies that were able to grow on higher concentrations of TLM than strain ANS6 (three attempts). This result was investigated further by introducing plasmids that overexpressed either FabH or FabB into strain ANS6 and examining the effect on TLM resistance (Table 1). The introduction of the FabB-expressing plasmid into strain ANS1 increased TLM resistance twofold to 6 µM. In contrast, the introduction of a plasmid expressing the FabB(F390) mutant protein increased the resistance of strain ANS1 to greater than 400 µM TLM. These data show that the expression of FabB(F390V) alone is sufficient to confer TLM resistance. Neither FabH nor FabB expression was able to alter TLM resistance in strain ANS6, indicating that neither of these proteins alone was responsible for the TLM sensitivity of strain ANS6. The resistance of strain ANS6 was selective for TLM. Strain ANS6 did not exhibit increased resistance to cerulenin, a condensing enzyme inhibitor, triclosan, a fatty acid biosynthesis inhibitor, or chloramphenicol (Table 1).
Phenotype of strain ANS6. In the absence of an altered growth phenotype on standard laboratory media, we compared the fatty acid composition of strain ANS6 to that of parent strain ANS1, since FabB is known to play a critical role in unsaturated fatty acid biosynthesis. The strains were grown to a density of 5 x 108 cells/ml in M9 minimal medium containing glucose as the carbon source; the lipids were extracted, and their fatty acid composition was determined by gas chromatography as described in Materials and Methods. We found no significant differences in the unsaturated fatty acid content or the chain-length distribution in strain ANS6 compared to strain ANS1. The unsaturated/saturated fatty acid ratios in membrane phospholipids were 1.01 in strain ANS1 and 0.96 in strain ANS6. Thus, the expression of the fabB390 allele does not impair the ability of FabB to perform its function in unsaturated fatty acid synthesis in vivo.
TLM resistance of the FabB(F390V) protein.
FabB(F390V) was expressed and purified to compare its biochemical properties with those of wild-type FabB. The specific activity of FabB(F390V) (0.26 ± 0.092 nmol/min/µg) was similar to that of the wild-type protein (0.34 ± 0.013 nmol/min/µg) when myristoyl-ACP was used as the substrate. However, unlike wild-type FabB, which is sensitive to TLM (50% inhibitory concentration [IC50],
20 µM), FabB(F390V) was clearly resistant to TLM in the in vitro assay (Fig. 1); the IC50 for FabB(F390V) under these assay conditions was 200 µM TLM. These data show that the substitution of valine for phenylalanine at position 390 in FabB impairs the interaction of TLM with FabB without seriously compromising the catalytic competence of the protein.
![]() View larger version (19K): [in a new window] |
FIG. 1. Activity and inhibition of FabB and FabB(F390V) by TLM. Wild-type FabB was sensitive to TLM, with an apparent IC50 of 20 µM under these assay conditions, whereas for the FabB(F390V) mutant, the apparent IC50 for TLM inhibition was 200 µM. The FabB and FabB(F390V) proteins were purified and assayed in the presence of the indicated concentrations of TLM as described in Materials and Methods.
|
80 µM (Fig. 2). The different responses of B. subtilis FabF and S. aureus FabF to TLM treatment suggested that the replacement of Phe with Leu does not significantly impair TLM binding and that there is another residue(s) in B. subtilis FabF that renders it TLM resistant. These data also explain why we did not isolate fabB missense mutants that generated a FabB(F390L) protein following TLM selection. A single-base missense mutation in fabB would have resulted in an altered gene that would have produced FabB(F390L), yet we did not obtain such a mutant in our screens.
![]() View larger version (19K): [in a new window] |
FIG. 2. Inhibition of S. aureus and B. subtilis FabF proteins by TLM. The B. subtilis FabF (bsFabF) and S. aureus FabF (saFabF) proteins were purified and assayed in the presence of the indicated concentrations of TLM as described in Materials and Methods. Error bars show standard deviations.
|
![]() View larger version (17K): [in a new window] |
FIG. 3. Models of binary complexes of FabB, FabB(F390V), and FabB(F390L) with TLM. Only the key TLM-interacting residues in the FabB active site are shown. TLM is represented with purple bonds, and red dots indicate hydrogen bonds formed between His298 and His333 and the carbonyl oxygen of TLM. (A) Crystal structure of the FabB-TLM binary complex (32). The side chain of Phe390 points away from the C11 methyl group of TLM. (B) Highest-scoring FabB(F390V)-TLM complex derived from docking calculations, showing that TLM cannot bind in the same orientation in the mutant protein. The CG2 methyl group of Val390 interferes with the proper positioning of the C11 methyl group of TLM, causing the drug to bind at the active site with the C11 of TLM rotated into a position that prevents favorable stacking interactions of the isoprenoid side chain of TLM with Pro272 and the peptide bond of Phe392. The side chain of Val390 cannot rotate away from the C11 of TLM. (C) Highest-scoring FabB(F390L)-TLM complex derived from docking calculations. The side chain of Leu390 is rotated away from the C11 methyl group of TLM in the same orientation as the Phe390 aromatic side chain, retaining the stacking interactions with Pro272 and the peptide bond of Phe392.
|
|
View this table: [in a new window] |
TABLE 2. Results of docking calculationsa
|
|
|
|---|
Our data show that a missense mutation in the fabB gene is sufficient to increase the resistance of cells to TLM. Previous work clearly pointed to FabB as the relevant cellular target for TLM, based on overexpression experiments (40). However, TLM-resistant fabB genes never arose from selections for strains for which the TLM MIC was elevated. Ablation of efflux pump activation as a mechanism for resistance by introduction of the tolC::Tn10 knockout mutation eliminated the high background of upregulated pump mutants and revealed a second mechanism for acquired TLM resistance. Six independent TLM-resistant clones were analyzed, and all possessed the same missense mutation that gave rise to the expression of FabB(F390V). Although FabH is also inhibited by TLM, the IC50 for FabH is 110 µM (32), and mutations in its gene were therefore not anticipated and were not found. The IC50 of TLM for FabB(F390V), estimated from Fig. 1, was apparently higher than the MIC for strain ANS6 (Table 1). One reason for this observation may be that there is a second, more sensitive TLM target than FabB(F390V) in strain ANS6. This idea, however, is not consistent with the observation that the expression of multiple copies of FabB(F390V) increased the TLM MIC for the sensitive strain to a higher level than for ANS6 (Table 1). TLM is a competitive inhibitor of the condensing enzymes with respect to malonyl-ACP (11, 32), and the most likely explanation for the discrepancy between the in vitro and in vivo results is that the concentration of malonyl-ACP in the in vitro assay is high, whereas the concentration of malonyl-ACP in vivo is much lower and may be a limiting factor in fatty acid synthesis (6). One explanation for the inability to obtain more mutants more resistant to TLM than strain ANS6 with the same approach may be that there are multiple targets. Since it is known that both FabH and FabB are targets and the biochemical data indicate that FabH and FabB(F390V) are about equally sensitive to TLM, a further increase in TLM resistance in strain ANS6 may require mutations in both of their genes. Accordingly, the overexpression of either FabB or FabH in strain ANS6 did not increase resistance to TLM, indicating that neither protein is the sole target for the antibiotic in this strain (Table 1). These results are consistent with the concept that there are two targets, postulated to be FabH and FabB, in strain ANS6, although we cannot rule out the existence of an as-yet-unidentified TLM target that becomes important in resistant strain ANS6.
The structural modeling showed that the source of the resistance conferred by the substitution of valine for phenylalanine at position 390 arises from the steric clash between the C11 methyl of TLM and the CG2 methyl of Val390 (Fig. 3). In agreement with these experiments, the energy minimization docking calculation predicted that the sensitivity of the mutant strain to TLM would be significantly reduced. The calculation also showed that the steric clash distorts TLM within the active site and forces the rotation of the isoprenoid tail within the binding pocket (Fig. 3B). Price et al. pointed out the importance of the stacking of the planar double-bonded isoprenoid moiety between the delocalized electron systems of the peptide bond between residues 391 and 392 and Pro272 in the binding of TLM to wild-type FabB (32). The rotated isoprenoid group in the FabB(F390V) complex no longer optimally packs into this hydrophobic binding cleft, and the disruption of this crucial interaction significantly contributes to the lower binding affinity (Table 2). It is also important to note that in the modeling of the mutants (both F390V and F390L), the presence of the amino acid substitution does not significantly alter the conformation of the active-site residues, Cys163, His298, and His333 (Fig. 3). Thus, it would be predicted from the models that these mutants would retain enzyme activity. The substitution of leucine for phenylalanine does not pose the same problem for TLM binding (Fig. 3C), since there is no CG2 methyl in leucine. The docked structure shows TLM binding to FabB(F390L) in the same mode as in the wild type, with the isoprenoid stacked neatly between the proline and the peptide bond. The important interactions between the delocalized electron systems are preserved, and the calculated binding energy (Table 2) predicts that this variant will be as sensitive to TLM as the wild type. This result explains why leucine, the only other residue found at this position in nature, still permits TLM inhibition (Fig. 2). If this notion is correct, then the resistance that B. subtilis FabF shows against TLM would be predicted to arise from another source, since the leucine at position 390 should not diminish TLM binding to the active site of this enzyme. A determination of the underlying cause for TLM resistance in B. subtilis will require the analysis of site-directed mutants.
We thank Pam Jackson and Amy Sullivan for expert technical assistance and Keum-Hwa Choi for providing the B. subtilis FabF protein.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»