Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, May 2002, p. 1597-1601, Vol. 46, No. 5
0066-4804/02/$04.00+0 DOI: 10.1128/AAC.46.5.1597-1601.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
LBCOP, UPRES 398-IFR 75, Faculté de Pharmacie, Université de Paris XI, 92290 Chatenay-Malabry Cedex,1 Biovector Therapeutics S. A., Chemin du Chêne Vert, 31676 Labège Cedex, France2
Received 18 October 2001/ Returned for modification 4 December 2001/ Accepted 4 February 2002
|
|
|---|
|
|
|---|
We report here on the design and antileishmanial evaluation of new stable ionic amphiphilic formulations of AmB. The new formulations were assessed in vitro on AmB-resistant intramacrophagic amastigotes and compared to Fungizone and AmBisome since previous studies have shown that new micellar formulations enhanced AmB activity in the case of an AmB-resistant Leishmania donovani line (4).
The Ionic Amphiphile Biovector (ABV) is a new type of drug carrier having both ionic hydrophilic and hydrophobic properties. The ionic amphiphilic properties are obtained by the inclusion of an ionic lipid phase in an oppositely charged polymer hydrogel network. The resulting polymer-lipid matrix loads easily and can be used to stabilize a large spectrum of insoluble hydrophobic or polar amphiphilic drugs. Charge sign, charge density, and size (micro or nanoparticles) are predefined by the conditions used for the chemical synthesis of the ionic hydrogel matrix. Ionicity and hydrophobicity can be easily tailored after completion of the synthesis by the quantity and type of lipid phase incorporated into the polymeric network (5).
The possibility of obtaining a particle size in the range of 100 nm enables the use of ABV for the intravenous (i.v.) administration of insoluble drugs.
In this work, we report on an evaluation of the capacity of cationic ABV with differing DPPG (dipalmitoyl phosphatidyl glycerol) contents to include and stabilize AmB in a submicroscopic particle. The efficacy of two selected ABV/AmB formulations differing in DPPG content was the evaluated with a L. donovani-infected mice model after i.v. administration, and the results were compared to the commercially available formulation AmBisome.
Cationic particles were obtained by the cross-linking of maltodextrins (Roquette Freres, Lestrem, France) with epichlorohydrin (Fluka) and further modification with glycidyl trimethyl ammonium (Fluka) as described elsewhere (1). Particles with a 60-nm diameter were obtained by high-pressure homogenization and were purified by ultrafiltration and microfiltration. Figure 1 shows an electron micrograph of the cationic polysaccharide particles (PSP). The cationic charge density (quaternary ammonium content) was 1.2 mEq/g.
![]() View larger version (173K): [in a new window] |
FIG. 1. Cryofracture transmission electron microscopy of cationic polysaccharide nanoparticles (PSP). Samples were frozen at -200°C and cryofracture was performed at -150°C on a Reicher-Jung Cryofract. Transmission electron microscopy was performed on a JEOL 1200 EX. Magnification, x135,000.
|
For all studies, the ABV concentration was kept constant at 10 mg/ml. The AmB concentration was in the range of 1 to 4 mg/ml. The solubility of free AmB in these conditions was lower than 0.1 mg/ml.
The ability of ABV to entrap and stabilize AmB was studied using a computer-generated experimental design and least-squares multiple regression software (Nemrod; LPRAI, Aix en Provence, France). AmB entrapped in the ABV was evaluated as the quantity of AmB passing through 0.2-µm-pore-size membrane filters and was determined spectrophotometrically at 340 nm. Figure 2 shows the two-dimensional response surface representing the entrapment yield in water as a function of DPPG percentage and AmB percentage. The yields were higher than 90% for all compositions. Particle size, measured on a Coulter N4D (Coultronics, Margency, France) Light Scattering system, was around 100 nm for all formulations. It is interesting to note that in a blank assayed using polysaccharide particles (PSP without DPPG), the particles were able to incorporate less than 20% AmB, indicating a strong solubility enhancement by the presence of lipids in the matrix. Figure 3 shows the filtration yield (0.2 µm) for particles incubated in phosphate-buffered saline (PBS) (room temperature, 30 min), indicating a clear instability of the system when the percentages of DPPG and AmB were increased. This suggests an important role for the excess cationic charge on particle and drug stabilization. Since DPPG and AmB are anionic, an increase in their concentration leads to particle neutralization and a decrease in stability.
![]() View larger version (38K): [in a new window] |
FIG. 2. Two-dimensional representation of AmB incorporation yield as a function of [DPPG] (10 to 40% [wt/wt]) and [AmB] (10 to 40% [wt/wt]) in water. Incorporation yield was calculated by the percentage of AmB passing through 0.2-µm-pore-size sterile filters and is indicated by the iso-response curves. Graphs were generated by NEMROD Software (LPRA).
|
![]() View larger version (34K): [in a new window] |
FIG. 3. Two-dimensional representation of AmB incorporation yield as a function of [DPPG] (10 to 40% [wt/wt]) and [AmB] (10 to 40% [wt/wt]) in PBS. Stability yield was calculated by the percentage of AmB passing through 0.2 µm sterile filters with respect to the quantity of AmB incorporated in water. Graphs were generated by NEMROD Software (LPRAI).
|
|
View this table: [in a new window] |
TABLE 1. Characteristics of AVB1 and ABV2 with or without AmBa
|
![]() View larger version (17K): [in a new window] |
FIG. 4. Stability characteristics of ABV/AmB formulations in terms of average size stability (measured on a Coulter N4D Submicronic Particle Analyzer) or incorporation stability expressed as the percentage of AmB passing through 0.2-µm-pore-size filters (determined spectrophotometrically).
|
Peritoneal macrophages were harvested from female CD1 mice (Charles River, Cléon, France) 3 days after an intraperitoneal injection of 1.5 ml of sodium thioglycolate (Biomérieux) and were dispensed into eight-well chamber slides (LabTek Ltd.) at a concentration of 5 x 104/well (400 µl/well) in RPMI 1640 medium (Life Technologies, Cergy-Pontoise, France) supplemented with 10% heat-inactivated fetal calf serum, 25 mM HEPES, and 2 mM L-glutamine (Life Technologies, Cergy-Pontoise, France). Four hours after the macrophages were plated, they were washed in order to eliminate fibroblasts. After 24 h, the macrophages were infected with promastigote forms of L. donovani DD8 wild type (WT) and AmB-R in a stationary phase at a ratio of 10 and 20 parasites per macrophage, respectively, to obtain 86% of infected macrophages and 10 ± 3 amastigotes per macrophage for the WT line and 52% of infected macrophages and 7 ± 2 amastigotes per macrophage for the AmB-R line. At 18 h after the promastigotes had entered macrophages, the free promastigotes were eliminated and intramacrophagic amastigotes were treated at various concentrations of AmB, from 0.01 to 1 µM (day 1). Fungizone served as the reference compound and AmBisome served as the reference formulation. The experiment was performed in triplicate. The culture medium was renewed 48 h later and a new culture medium containing the drug was added. The experiment was stopped at day 5, and the percentage of infected macrophages was evaluated microscopically after Giemsa staining. The 50% inhibitory concentrations were determined by linear regression analysis, 95% confidence limits were calculated and the P value were calculated using the Student t test.
The in vitro activities of the two standard drugs, Fungizone and AmBisome, against L. donovani DD8 WT intramacrophagic amastigotes were similar to those of ABV1/AmB and ABV2/AmB (0.041 to 0.075 µM against WT and 0.657 to 0.771 µM against AmB-R), and no special activity enhancement was detected (Fig. 5).
![]() View larger version (44K): [in a new window] |
FIG. 5. In vitro activity of AmB formulations on L. donovani intramacrophagic amastigotes. After WT strain infection (shaded bars), 86% of the macrophages were infected, and nontreated infected macrophages contained 10.2 ± 3.1 amastigotes 4 days postinfection. After AmB-R strain infection (hatched bars), 52% of the macrophages were infected, and nontreated infected macrophages contained 7.4 ± 2.6 amastigotes 4 days postinfection. IC50, 50% inhibitory concentration.
|
The two formulations (ABV1/AmB, ABV2/AmB) were compared to AmBisome in a challenge against L. donovani LV9 on BALB/c-infected mice at the single doses of 5 and 0.25 mg/kg of body weight i.v. administered. Three groups were compared using the Kruskall-Wallis test, and two groups were compared using the U-Mann and Whitney tests.
The results are presented in Table 2 as parasite elimination efficacy after i.v. injection. No difference, as evidenced by leishmanicidal activity in vivo, at 0.25 mg of AmB/kg was detectedbetween ABV1/AmB and AmBisome, whereas ABV2/AmB was slightly less efficient than AmBisome (P < 0.03). At the higher AmB dosage, 5 mg/kg, AmBisome was significantly more efficient than ABV1/AmB and ABV2/AmB (P values of <0.01 and <0.02, respectively). No difference was observed between ABV1/AmB and ABV2/AmB, although ABV2/AmB was more toxic, provoking a decrease in the weight of the mice at the end of the experiment.
|
View this table: [in a new window] |
TABLE 2. Effect of Ionic Amphiphile Biovector systems on the L. donovani LV9/BALB/c mouse model compared to AmBisomea
|
On the basis that the antiparasitic activities of the AmB formulations are dependent on the delivery of the drug to the infected phagocytes of the mononuclear phagocytic system, it appears difficult to classify the formulations as a function of their activity in comparison to AmBisome. The use of ABV2 led to a 5% decrease in the weight of the mice after treatment at a dose level of 5 mg/kg, which might be a drawback to its further use. Considering both toxicity and antileishmanial activity, AmBisome seems slightly more active and safer than the ABV formulations tested.
Ionic Amphiphile Biovectors are, however, in the early stages of development. Size, charge density, lipid ratio, and lipid type could all be optimized in order to improve formulation efficacy.
In this work, a new ionic amphiphile particulate drug delivery system was used to formulate AmB for i.v. administration. The system consisted of an ionic polymer network into which an opposite charge lipid phase was included, which gave amphiphilic properties to the ionic polymer-lipid complex matrix. The system showed quantitative yields of incorporation with good stability in saline conditions, resulting in 20% (wt/wt) AmB being loaded into 100-nm-diameter sterile nanoparticles ready for injection. The evaluation of these particles in a challenge against L. donovani in infected mice yielded results similar to those of the commercially available system AmBisome.
The major advantage of the ABV formulations is their capacity to incorporate AmB actively with quantitative yields by using a simple mixing procedure and subsequently facilitating the formulation and manufacturing process. They have a high stability in saline and can be sterilized by filtering on 0.2-µm-pore-size filters without any significant loss of material, which could lead to stable ready-to-use suspensions. These results are very promising, since ABV can be optimized in terms of par-ticle size, charge, lipid composition, and AmB loading. In further studies we plan to consider these physico-chemical parameters as well as the pharmacokinetics and the optimization of a treatment regimen.
Ionic Amphiphile Biovector technology appears to be a promising tool for the formulation of poorly soluble drugs since their solubilizing properties are not limited to AmB and could be extended to other drugs by using a single technology platform.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»