Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, July 2002, p. 2169-2173, Vol. 46, No. 7
0066-4804/02/$04.00+0 DOI: 10.1128/AAC.46.7.2169-2173.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Department of Genetics and Microbiology, Centre Médical Universitaire, CH-1211 Geneva 4, Switzerland
Received 5 October 2001/ Returned for modification 14 December 2001/ Accepted 12 April 2002
|
|
|---|
|
|
|---|
The Acr, Mex, and Mtr pumps described for Escherichia coli, Pseudomonas aeruginosa, and Neisseria spp., respectively, are composed of three individual proteins. The actual pump component is a 12-transmembrane-segment protein located in the cytoplasmic membrane (6, 7). It is an antiporter deriving the energy for the transport from the proton gradient. The second component is an outer membrane protein which is thought to be connected with the efflux pump by a third component, called a periplasmic link protein or membrane fusion protein (29). These three proteins form a channel which permits the extrusion of substrate molecules directly from the cytoplasm or the periplasm into the external medium (20). Several models have been proposed to explain the interactions between the three components of these efflux systems (10, 30).
The Mex pumps of P. aeruginosa are the best-studied RND-type pumps together with the AcrAB-TolC system of E. coli. The four different Mex systems differ in their substrate and expression profiles. MexAB-OprM is the only efflux pump that is constitutively expressed and therefore contributes to the natural resistance of P. aeruginosa to a variety of antimicrobial agents and organic solvents. The MexCD-OprJ (22) and MexEF-OprN (12) systems, which are not expressed under laboratory growth conditions, do not contribute to the natural resistance of this organism. These systems, once overexpressed due to mutational events, confer resistance to both charged and uncharged antibiotics (17). The recently described MexXY system (18, 24) is particular in that it pumps out, among other substrates, the hydrophilic aminoglycosides and is inducible by substrate antibiotics, such as tetracycline and gentamicin (16).
The basis for the diversity in substrate profile of RND pumps and in particular those of the Mex pumps remains unknown. Reports on the MexB efflux pump (8), on the major facilitator family members, such as Bmr from Bacillus subtilis and MdfA of E. coli (2), and on staphylococcal (small) multidrug resistance pump family members, such as EmrE from E. coli (28), highlight the importance of charged amino acids in transmembrane segments (TMS). In the present study, we describe the site-directed mutagenesis of conserved charged residues in three TMS of the MexF efflux pump protein of P. aeruginosa.
|
|
|---|
Hg derivative obtained by transduction of the Hg cassette from the mexB::
Hg strain PAM1275 (kindly provided by O. Lomovskaya) into strain PT149 (nfxC) (formerly called PAO-7H) (12). Disruption of the mexF gene in strain PT644 resulted in the
mexF derivative PT644
F (see below). Escherichia coli DH10B was used for propagation of various plasmid constructs. E. coli and P. aeruginosa were grown in Luria-Bertani broth (LB) or on LB agar plates. When necessary, ampicillin (100 µg/ml), gentamicin (15 µg/ml), or tetracycline (15 µg/ml) for E. coli or gentamicin (15 µg/ml) or mercuric chloride (Hg) (12.5 µg/ml) for P. aeruginosa was added to growth medium. For trans complementation experiments of strain PT644
F with the mexF gene, 2 mM isopropyl-ß-D-thiogalactopyranoside was added to growth medium. All bacterial cultures in LB were incubated at 37°C with shaking (200 rpm). Chemicals and antibiotics, if not specified, were from Sigma Chemicals. |
View this table: [in a new window] |
TABLE 1. Strains and plasmidsa
|
Plasmid constructions.
The mexF gene (3.7-kbp fragment) was introduced into the multipurpose cloning vector pIC20H (15) by a two-step cloning approach. First, a 2-kbp Eco47III fragment from pOPNL4 (12) containing the 5' end of the mexF gene was cloned into pIC20H digested by SmaI to obtain pICN47. Then, a 1.7-kbp NcoI-BamHI fragment carrying the 3' portion of mexF was introduced into pICN47 to reconstitute the mexF gene, yielding plasmid pICN64. A 3.7-kbp EcoRI-HindIII fragment from pICN64 was cloned into pMMB207GM to yield plasmid pMMBN126. This last construction was transferred conjugally into P. aeruginosa strain PT644
F for trans complementation. The recombinant plasmids pL2EK, pL4EK, pL4DDAG, and pL10KE, resultant from point mutagenesis of the mexF gene, were obtained as described below.
Generation of an unmarked nonpolar mexF deletion strain.
An unmarked nonpolar deletion of the mexF gene in strain PT644 was generated according to the method described by Hoang et al. (9). First, the mexF gene carried as a 3.7-kbp BamHI-EcoRI fragment on plasmid pICN64 was cloned into the mobilizable suicide vector pME3087 (a gift from D. Haas) to obtain pMEBHN131. In this construct an internal 1.2-kbp PstI fragment of mexF was deleted and replaced by the Gm-GFP cassette excised by PstI digestion from plasmid pSP858 (9), yielding plasmid pMEBHN15. This construct was conjugally transferred into PT644 for replacement of the chromosomal mexF gene by homologous recombination. Tetracycline-sensitive (Tcs) and gentamicin-resistant (Gmr) colonies were tested by PCR for insertion of the Gm-GFP cassette into mexF. Plasmid pFLP2 (9), which contains the yeast Flp recombinase, was then mobilized into Tcs and Gmr colonies to excise the Gm-GFP cassette. All clones tested had lost the Gmr marker. Finally, plasmid pFLP2 was cured from Tcs and Gms clones by streaking onto LB agar plates supplemented with 5% sucrose. One carbenicillin-sensitive (Cbs) clone, called PT644
F, was confirmed by PCR to contain the expected deletion in mexF. The deletion caused a frame shift in the mexF open reading frame, creating a stop codon at position 1200 of the original mexF gene.
Site-specific mutagenesis. Point mutations were introduced into the mexF gene carried by plasmid pICN64 using sense and antisense mutagenic primers in a one-step PCR procedure. Approximately 10 to 20 ng of plasmid DNA from E. coli served as a template for PCRs. The PCR mixture was composed of a 1 µM concentration of each primer, 8% dimethyl sulfoxide, each deoxynucleotide triphosphate at a concentration of 250 µM in 1x PCR buffer, and 1.25 U of Pfu DNA polymerase (Promega) in a final volume of 25 µl. The PCR program was 1 min at 95°C, followed by 20 cycles of 30 s at 94°C, 30 s at 45°C, 12 min at 68°C, and a 12-min final extension at 72°C. Then, the PCR product was treated with the DpnI restriction enzyme to digest template and hybrid DNA and to allow the enrichment of newly synthesized DNA containing the desired mutation.
Antimicrobial susceptibility assays. The susceptibilities of strains to antimicrobial agents were determined by the broth microdilution method (11).
Production of polyclonal antiserum. A 500-bp NcoI-BglII DNA fragment from plasmid pICN64, encoding part of the periplasmic loop between transmembrane segments 1 and 2 of MexF, was cloned into the His tag expression vector pQE60 (Qiagen S.A.), yielding plasmid pQEN65. An overnight culture of JM109 (pQEN65) diluted 20- to 50-fold was incubated at 37°C with ampicillin (100 µg/ml) until the cell density reached an optical density at 600 nm of approximately 0.5. Subsequent induction with 1 mM isopropyl-ß-D-galactopyranoside and analysis of total cell extracts by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed the presence of a 17-kDa polypeptide. This His-tagged protein was purified under denaturing conditions (8 M urea) on a nickel-nitrilotriacetic acid (Ni-NTA) resin column as described in the QIAexpressionist handbook (Qiagen S.A.). The purified protein was injected into a rabbit followed by two further boosts (Eurogentec, Seraing, Belgium).
Isolation of total membranes, protein electrophoresis, and Western blot analyses. Cells grown in LB were harvested, resuspended in 50 mM Tris-HCl (pH 7.5), and broken by sonication in the presence of 100 µg of lysozyme/ml. Unbroken cells were removed by centrifugation at 10,000 x g for 10 min. Supernatants containing total membranes were concentrated 50-fold on a minicon column (Amicon). The concentrated extracts were resuspended in 2x SDS loading buffer. Samples were heated at 100°C for 5 min, subjected to electrophoresis in SDS-10% PAGE gels, and stained with 0.1% Coomassie blue solution. Alternatively the proteins were transferred to nitrocellulose membranes. The blots were incubated with a 1:1,000 dilution of the primary anti-MexF antibody in TBS (10 µM Tris [pH 7.4], 150 mM NaCl) plus 0.1% Tween 20 and subsequently revealed with alkaline phosphate-conjugated goat anti-rabbit immunoglobulin G (Bio-Rad) using the Lumi-Light Western blotting substrate kit (Roche).
|
|
|---|
![]() View larger version (54K): [in a new window] |
FIG. 1. Conserved amino acid residues in TMS 2, 4, and 10 of the RND proteins. Alignment of three TMS of the Acr (B and F) (E. coli), Mex (B, D, F, and Y) (P. aeruginosa), and CzcA (Ralstonia spp.) efflux pump proteins are presented. Conserved charged residues are shown in bold letters, and amino acid residues mutated in MexF are shown by asterisks. The arrow indicates the TMS and its orientation in the membrane (periplasm cytoplasm).
|
mexF strain PT644
F by MIC determinations. Mutations in TMS4. Simultaneous substitution of both D410A and D411G residues in TMS4 completely inactivated the MexF protein (pL4DDAG) (Table 2) without affecting its expression levels, as shown by Western blot analysis (Fig. 2). These data are in agreement with those reported by Guan et al. (8), who found that the equivalent residues D407 and D408 of the MexB protein are essential for MexB function. In contrast to Guan's study, we also mutated the conserved E417 residue (corresponding to E414 in MexB). The E417K substitution yielded a normally expressed MexF protein (Fig. 2) but was unable to transport any of the MexF substrate molecules (pL4EK) (Table 2). Hence, this residue, located next to TMS4 in the cytoplasmic side of MexF, is also essential for MexF function. E417 is part of the conserved DDXXXXXE motif predicted to be involved in proton translocation in the CzcA heavy metal transporter of Ralstonia spp. (5). Indeed, substitution of the residue D408Q in CzcA (corresponding to D410 in MexF) resulted in a protein able to promote passive diffusion of metal cations across proteoliposomes but unable to catalyze proton/cation antiport in vivo (5). Since the drug-transporting pumps Acr and Mex are able to extrude uncharged hydrophobic molecules like organic solvents and chloramphenicol, it was proposed that a charge relay system was not involved in drug/proton translocation (5, 31). Our results with MexF proteins mutated in residues D410/D411 and E417, however, demonstrate that the DDXXXXXE motif is essential even for the transport of uncharged hydrophobic drugs, such as chloramphenicol.
|
View this table: [in a new window] |
TABLE 2. Effect of amino acid substitutions in MexF on MIC profiles
|
![]() View larger version (52K): [in a new window] |
FIG. 2. Western blot analysis of MexF mutants. Total protein extracts of PT644 F harboring the different plasmid constructions corresponding to MexF E349K, D410A/D411G, E417K and K951E mutants are presented. The nfxC strain PT644 served as a control. Samples were analyzed by SDS-PAGE followed by Western blot analysis using polyclonal antibodies against MexF. Each lane contained 5 µg of total protein.
|
Mutation in TMS2.
The substitution E349K in TMS2 resulted in a MexF mutant protein unable to transport trimethoprim and quinolones but retaining partial activity towards chloramphenicol (pL2EK) (Table 2), while expression of the mutated MexF protein was unaffected (Fig. 2). This could mean either that E349 is involved in substrate selectivity or, alternatively, that the activity of the mutant protein is generally decreased such that the preferred substrate molecule chloramphenicol (MIC ratio of 256 for the strain couple PT644/PT644
F) is still transported, while ciprofloxacin and trimethoprim (MIC ratios of 32 and 64, respectively) are not. The latter possibility would be in agreement with results from the MexB analysis, where the E346K substitution, equivalent to E349K in MexF, also resulted in a mutant MexB protein which showed reduced transport activity of its antibiotic substrates (8). Involvement of the residue E349 in substrate selectivity is supported by studies of the multidrug transporter MdfA of E. coli., where a single membrane-embedded negatively charged residue (E26) is critical for recognition of positively charged drugs but not for the uncharged chloramphenicol (2).
Taken together, our results on MexF and those of Guan and Nakae (8) on the MexB protein suggest that the five conserved charged residues located in TMS 2, 4, and 10 are involved in properties common both to efflux pump proteins and probably also to other RND members. They could be responsible for the spatial arrangement of TMS in the membrane determined by ionic interactions between these charged residues or for the translocation of protons which is common to all proton motif force-driven efflux pump proteins. Further investigations at the atomic level are required to analyze the topology of these important efflux pump proteins.
This work was supported by grant no. 3100-055961 from the Swiss National Science Foundation and by grant no. C00.0048 from the COST action B16 to T.K.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»