Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, January 2004, p. 313-318, Vol. 48, No. 1
0066-4804/04/$08.00+0 DOI: 10.1128/AAC.48.1.313-318.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Department of Microbiology,1 Department of Chemistry, AstraZeneca R&D Boston, Waltham, Massachusetts 024512
Received 21 July 2003/ Returned for modification 2 September 2003/ Accepted 8 October 2003
|
|
|---|
|
|
|---|
Dimster-Denk and Rine (5) and Dixon et al. (7) developed virtually identical gene reporter assays for Saccharomyces cerevisiae for the identification of fungal sterol biosynthesis inhibitors that could serve as chemical starting points for new drug discovery programs. The attractiveness of this assay resides in the fact that it can in principle identify inhibitors of any of the essential steps in the pathway. Furthermore, since this is a cell-based assay, all of these inhibitors are expected to have at least some degree of antifungal activity. The use of this assay has led to the identification of a new class of antifungal pyridines and pyrimidines that is also distinct from the most closely related class of antifungal pyrimidines, exemplified by triarimol. Furthermore, whereas triarimol-like pyrimidines have been described as inhibitors of lanosterol demethylase in fungal plant pathogens (20), the compounds described here are the first examples of pyridines and pyrimidines inhibiting lanosterol demethylase (Erg11p) of Candida albicans.
|
|
|---|
leu2-3,112 ura3-52-pERG10-Escherichia coli lacZ-URA3 rme1 trp1 his4), referred to as MEY133::pACoAT by Dixon et al. (7); C. albicans CAF 2-1 (SC5314 URA3/ura3::
imm434) (9); and C. albicans DSY654 (SC5314 ura3::
imm434/ura3::
imm434 cdr1::hisG/cdr1::hisG cdr2::hisG-URA3-hisG/cdr2::hisG) (17). S. cerevisiae FSB1 was grown in uracil-deficient yeast minimal broth. One-liter volumes of broth were prepared by adding yeast nitrogen base without amino acids (6.7 g; Difco), adenine sulfate (40 mg), L-arginine-HCl (20 mg), L-methionine (20 mg), L-tyrosine (30 mg), L-isoleucine (30 mg), L-lysine-HCl (30 mg), L-phenylalanine (50 mg), L-glutamic acid (100 mg), L-aspartic acid (100 mg), L-valine (150 mg), L-threonine (200 mg), and L-serine (400 mg). This broth was brought to a pH value of 5.4 and a final volume of 900 ml and autoclaved. Before the broth was used, 100 ml of filter-sterilized 20% glucose was added along with 200 µl of filter-sterilized stock solutions (10 g · liter-1) of each histidine, tryptophan, and leucine. YPD consisted of yeast extract (10 g · liter-1), Bacto Peptone (20 g · liter-1), and glucose (20 g · liter-1).
Susceptibility testing. The susceptibility of the isolates was determined according to the NCCLS M-27A broth microdilution method (13).
Control inhibitors. The following control inhibitors were purchased from commercial sources (in parentheses): alendronate (Calbiochem), amphotericin B (Sigma), chlorhexidine (Sigma), cycloheximide (Calbiochem), fluconazole (ICN Biomedicals), flucytosine (Aldrich), 5-fluoro-orotic acid (Acros Organics), lovastatin (Sigma), terbinafine (TCI), and zaragozic acid (Sigma). Lovastatin was activated by heating a 6-mg · ml-1 stock solution in 50% (vol/vol) ethanol-0.2 N NaOH for 40 min at 65°C, after which 1 volume of 1 M Tris HCl (pH 8.0) was added; this stock solution was stored at -20°C (6). A mock solution that did not contain lovastatin but was treated identically was generated. This "lovastatin control" did not contain antifungal activity and did not induce ß-galactosidase activity.
Reporter assay. S. cerevisiae FSB1 was grown overnight in 25 ml of yeast minimal broth in 125-ml flasks at 30°C at 120 rpm in a shaking incubator (ISF-4-W; Kühner, Birsfelden, Switzerland). The culture, typically with an optical density at 600 nm (OD600) of 1 to 3, was diluted to a final OD600 of 0.03 in 50-µl volumes of yeast minimal broth containing a final concentration of 2% (vol/vol) dimethyl sulfoxide (DMSO) and 10 subsequent twofold dilutions of the compound of interest, starting at a maximum concentration of 64 µg · ml-1 (except for control compounds amphotericin B and 5-fluoroorotic acid, for which the starting concentrations were 18 and 512 µg · ml-1, respectively). Samples were prepared in quadruplicate and were distributed into 384-well plates (Costar) and incubated for 24 h at 30°C without shaking (model 5025 incubator; VWR Scientific). Subsequently, well contents were mixed and cell densities were determined with a plate reader (Spectra Fluor Plus; Tecan). To this end, the densities of one set of duplicate wells were measured without dilution; for the other duplicate set, 25 µl of each well was diluted twofold into medium containing the compound, if any, at an identical concentration. This process resulted in the establishment of a reference OD600 for the undiluted wells; wells with OD600s higher than 1.5 or lower than 0.1 were rejected because the cultures in these wells were too dense or too dilute, respectively, for reliable quantitative measurement. To each well, 50 µl of reaction buffer (0.4 M Na2HPO4, 0.2 M NaH2PO4, 0.05 M KCl, 0.01 M MgSO4, 0.135% [vol/vol] ß-mercaptoethanol, 0.1% sodium dodecyl sulfate, 2.5 mM chlorophenol red-ß-D-galactopyranoside [pH 7.0]) was added as described by Dixon et al. (7), and plates were incubated at 30°C (model 5025 incubator; VWR Scientific). Color development was monitored hourly by mixing well contents, followed by measurement of the A570. The highest level of specific activity was typically found at the highest compound concentration that allowed fungal growth.
Acetate incorporation and analysis of sterol intermediates. The method for acetate incorporation and the analysis of sterol intermediates was based on that of Ryder et al. (16). Strains of C. albicans were grown overnight in 25 ml of YPD in 125-ml flasks at 30°C with shaking at 130 rpm (ISF-4-W; Kühner), which typically resulted in an OD600 of 5 to 10. Cultures were centrifuged at 4°C at 3,500 rpm for 10 min (Allegra 6R centrifuge; Beckman) and subsequently resuspended in 25 mM NaH2PO4-1% glucose (pH 6.5). Centrifugation was repeated, and the cells were resuspended at a final OD600 of 5.
One-milliliter volumes of resuspended cells were incubated in six-well plates at 30°C with shaking at 150 rpm (Environ shaker; Labline). To each well, 20 µl of DMSO containing various amounts of test compound was added. After 30 min, 10 µl of 100 mM acetic acid was added along with 30 µl of [2-14C]acetate (6 µCi [60 mCi · mmol-1]; Amersham). Labeled acetate was allowed to incorporate for 90 min, after which the contents of each well were added to 2 ml of freshly prepared 15% (wt/vol) ethanolic KOH in 15-ml Falcon tubes. Mixtures were transferred to an 80°C water bath and kept there for 90 min, after which they were cooled to room temperature.
One 3-ml volume of distilled water was added to each tube, followed by the addition of 3 ml of petroleum ether (40 to 60°C, vol/vol). Samples were mixed, and the petroleum ether layer was removed and retained. Another volume of petroleum ether (40:60, vol/vol) was then added, mixed, and recovered. The two aliquots were combined and dried by rotary evaporation (Universal Vacuum System Plus, model UVS800DDA; Savant). The dry preparations were resuspended in 50 µl of hexanes. For thin-layer chromatographic analysis, samples with equal amounts of radioactivity (10,000 to 50,000 dpm) were loaded on Silica Gel 60 F254 plates (Merck, Darmstadt, Germany) and were developed in chloroform. Plates were exposed to a low-energy phosphor screen (Molecular Dynamics) for 1 to 2 days and analyzed with a PhosphorImager (Molecular Dynamics).
In order to confirm the chromatographic properties of various metabolites as they were reported by Ryder et al. (16), 10- to 50-nmol samples of purchased, unlabeled intermediates were loaded and run on Silica Gel 60 plates and visualized by spraying the plates with 40% (wt/vol) sulfuric acid in ethanol, followed by baking for 10 min at 110°C. Rf values determined for intermediates were 0.08 to 0.13 for ergosterol (Sigma), 0.13 to 0.18 for farnesol (ICN), 0.17 to 0.22 for lanosterol (ICN), 0.44 to 0.53 for oxidosqualene (Echelon Biosciences), and 0.72 to 0.75 for squalene (Sigma).
Untreated cells were found to accumulate lanosterol (11%), 4-
-methylated sterols (13%), and ergosterol (76%), whereas the maximum inhibition of lanosterol demethylase resulted in 76% lanosterol, 15% 4-
-methylated sterols, and 9% 4-ergosterol. The IC50, lanosterol was therefore defined as the compound concentration causing half the effect of maximum inhibition, i.e., resulting in a lanosterol content of 45%, and the inhibition of lanosterol demethylase was quantitated by determining the IC50, lanosterols of various compounds.
Chemical synthesis of pyridine and pyrimidine derivatives. Figure 1 outlines the synthetic schemes and experimental conditions used to prepare the compounds under study. Pyridine derivatives (Fig. 1A) were prepared from 4-chloropyridine. Treatment with a strong base (lithium diisopropylamide [1 eq]-tetrahydrofuran [THF] at -70°C for 1.5 h) produced the 3-lithio species that was reacted in situ with the required substituted benzaldehydes (R1R2PhCHO [1.1 eq] for 1.5 h at -70°C), affording the alcohol intermediates 1a through 1c (30 to 40% yield). Alcohols 1a through 1c were reacted with benzyl bromide (sodium hydride [2.5 eq]-nBu4NI [cat]-PhCH2Br [2 eq]-dimethylformamide [DMF] at 0°C for 2 h; 80 to 90% yield) or diethyl carbamoylchloride (sodium hydride [3 eq]-diethyl carbamoylchloride [2 eq]-THF at 0 to 25°C for 1.5 h; 80 to 90% yield) to give ethers 2a and 2b or carbamates 5a through 5c, respectively. The chloride group of compound 2a was displaced with azide ion (sodium azide [5 eq]-18-crown-6 [cat]-DMF-water [5:1, vol/vol] at 95°C for 18 h; 70% yield) or 2-mercaptoethanol (2-mercaptoethanol [2 eq]-potassium carbonate [6 eq]-DMF at 80°C for 45 min; 80% yield) to yield the derivatives 3c and 4c, respectively. Carbamate 5a was resolved into its component enantiomers via chiral preparative high-pressure liquid chromatography (Chiracel AD, 50 by 500 mm; isocratic elution, 5% isopropanol-95% hexane at 100 ml · min-1; UV detection at 254 nm). The absolute configuration of the enantiomerically pure materials was not determined.
![]() View larger version (25K): [in a new window] |
FIG. 1. Preparation of pyridine (A) and pyrimidine (B) compounds (numbers in boldface refer to the various compounds). (A) Reaction a, lithium diisopropylamide, THF, and (R1R2)PhCHO; reaction b, NaH, PhCH2Br and DMF; reaction c, NaH, diethyl carbamoylchloride, and THF; reaction d, NaN3, DMF, and water; reaction e, 2-mercaptoethanol, K2CO3, and DMF; reaction f, chiral-phase preparative high-pressure liquid chromatography. (B) Reaction a, nBuLi, THF, diethylether, and R1R2PhCHO; reaction b, NaH, PhCH2Br, and DMF; reaction c, nBuLi, THF, diethylether; and 2-fluoro-6-trifluoromethylbenzaldehyde; reaction d, NaH, PhCH2Br, and THF.
|
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Effects of control inhibitors and pyri(mi)dines on the induction of specific ß-galactosidase activity in S. cerevisiae FSB1a
|
|
View this table: [in a new window] |
TABLE 2. Activities of pyridines and pyrimidines against C. albicans CAF2-1 and its efflux-negative derivative C. albicans DSY654 and their potency in inducing lanosterol accumulation in C. albicans DSY654
|
In order to determine which step in fungal ergosterol biosynthesis was inhibited, the fate of incorporated 14C-labeled acetate was monitored as described by Ryder et al. (16). To validate this assay, cells were treated with characterized sterol biosynthesis inhibitors (Fig. 2). In the absence of inhibition, three bands, corresponding to lanosterol, 4-
-methylated sterols, and ergosterol, were observed (16). Treatment with the lanosterol demethylase inhibitor fluconazole led to the accumulation of lanosterol, whereas the squalene epoxidase inhibitor terbinafine caused the accumulation of squalene. As expected, the inhibition of squalene synthase by zaragozic acid did not result in the accumulation of squalene but did lead to the appearance of a previously described (16), uncharacterized intermediate migrating with 4-
-methylated sterol, which we believe to be farnesol (see below). Since lovastatin acts in the mevalonate pathway, the accumulation of sterol-like intermediates was not expected. At a lovastatin concentration of 64 µg · ml-1, the cellular levels of all intermediates were reduced fivefold, but that left the relative amounts of each sterol (95% ergosterol and 5% 4-
-methylated sterols) virtually unchanged relative to those in untreated cells. Finally, since flucytosine resulted in high ß-galactosidase activities, the effect of this compound at a concentration of 64 µg · ml-1 on sterol biosynthesis was evaluated, but no effect was found (82% ergosterol, 8% 4-
-methylated sterols, and 8% lanosterol).
![]() View larger version (26K): [in a new window] |
FIG. 2. Incorporation of 14C-labeled acetate into nonsaponifiable lipids of C. albicans DSY654 upon treatment with various concentrations of ergosterol biosynthesis inhibitors. Concentrations of ergosterol (diamonds), lanosterol (triangles), squalene (asterisks), and 4 -methylsterols/farnesol (squares) are shown.
|
-methylated sterols, and 14% lanosterol) or lovastatin, it is likely that the metabolite was related to farnesyl-diphosphate. Commercially available 3H-farnesyl-diphosphate was subjected to the same treatment as cell extracts were, i.e., incubation in hot ethanolic KOH and subsequent extraction with petroleum ether. Whereas the nontreated control did not migrate upon thin-layer chromatography in chloroform, the treated control preparation contained a metabolite migrating to a position similar to those of both the uncharacterized band and the commercially available farnesol (data not shown). This finding suggests that the presence of farnesol among nonsaponifiable lipids obtained from zaragozic acid-treated cells of C. albicans is the result of farnesol formation by the cells (10) and the conversion of farnesyl-diphosphate into farnesol during saponification.
Treatment of cells with the first-discovered compound, 5b, and a number of similar compounds of that class all resulted in the accumulation of lanosterol and thus a pattern identical to that caused by fluconazole. In order to quantitate this inhibition, cells were treated with various concentrations of compound, and as a result, IC50, lanosterols could be determined. Untreated cells were found to accumulate lanosterol (11%), 4-
-methylated sterols (13%), and ergosterol (76%), whereas the maximum inhibition of lanosterol demethylase inhibition resulted in 76% lanosterol, 15% 4-
-methylated sterols, and 9% 4-ergosterol. The IC50, lanosterol was therefore defined as the compound concentration causing half the effect of maximum inhibition, i.e., resulting in a lanosterol content of 45%. Compounds were selected from a range of antifungal activities, and the effects of their presence on ergosterol biosynthesis were determined qualitatively and quantitatively. All compounds caused the accumulation of lanosterol, and their IC50, lanosterols were typically below the MICs of the compounds (Table 2). In addition, a correlation between the IC50, lanosterol and the MIC was obtained (Fig. 3). This finding suggests that the inhibition of lanosterol demethylase is not merely a secondary effect but that the inhibition of lanosterol metabolism is the antifungal mode of action of these pyri(mi)dines.
![]() View larger version (10K): [in a new window] |
FIG. 3. Antifungal activities of pyridines and pyrimidines correlate with their potency in reducing ergosterol biosynthesis in C. albicans DSY654, as indicated by their IC50, lanosterols.
|
|
|
|---|
The most obvious factor differentiating the control inhibitors is the possible accumulation of intermediates and their incorporation into the cell membrane. Treatment with zaragozic acid or lovastatin led to very similar activities (12 to 16 mA570 · min-1 · OD600-1) (Table 1). Since under these conditions no accumulated intermediates are incorporated into the cell membrane, this finding suggests that this signal was solely the result of diminished ergosterol levels. Treatment with fluconazole also led to ß-galactosidase activities of 12 mA570 · min-1 · OD600-1 (Table 1), showing that the accumulation of lanosterol is of no consequence to the signal. Treatment with terbinafine, however, resulted in a three- to fourfold-higher signal (48 mA570 · min-1 · OD600-1) (Table 1), which indicates that the accumulation of squalene has a profound effect on the feedback mechanism that leads to the transcription of ERG10. The implication is that although this assay may in principle detect inhibitors of each step in the pathway, screening results will be biased towards inhibition of more sensitive steps, such as the squalene epoxidase step.
A further complication of the assay is that flucytosine was a strong inducer of the reporter, whereas its antifungal activity is mediated by the inhibition of RNA and DNA biosynthesis (21). In accordance with its mechanism, no alteration in sterol biosynthesis was observed (data not shown). 5-Fluoroorotic acid, which is converted in 5-fluorouracil and has a mode of action similar to that of flucytosine, induced the reporter enzyme as well (9.4 mA570 · min-1 · OD600-1). Since both compounds interfere with the availability of uridine metabolites for RNA biosynthesis, it can be expected that genes involved in uridine biosynthesis will be activated upon exposure to these compounds. One of these genes, URA3, was used to integrate the reporter construct (7), but it is not clear whether terminator sequences that would prevent read-through from URA3 into ERG10-lacZ are present. One explanation for our results is that such transcriptional read-through, leading to ß-galactosidase activity, might have occurred. It should be stated, though, that recently published microarray analyses do not provide evidence that an upregulation of URA3 upon the exposure of S. cerevisiae to flucytosine does indeed occur (1, 22).
The induction of the reporter enzyme in the presence of pyridines or pyrimidines suggested that these compounds inhibited sterol biosynthesis in S. cerevisiae. Hence, the effects of this class of compounds on sterol biosynthesis in C. albicans were evaluated in order to rule out interference with uridine metabolism and assess the mode of action in this pathogen. The mutant DSY654 was used because antifungal activity could be observed only in the absence of efflux. Analysis of sterol metabolites showed that lanosterol accumulated but that ergosterol levels decreased. Quantification of this effect led to the determination of IC50, lanosterols, which were typically well below the MICs. This finding implies that when this strain of C. albicans is incubated with compound concentrations at approximately the MIC, sterol metabolism is severely compromised. Furthermore, the antifungal potency of compounds in this series ranks with the potency of inhibition of lanosterol demethylase, as assessed by lanosterol accumulation (Fig. 3). This finding strongly suggests that the inhibition of this step in sterol biosynthesis is the antifungal mode of action of these compounds.
|
|
|---|
-methylergosta-8,24(28)-dien-3ß,6
-diol. Biochem. Biophys. Res. Commun. 207:910-915.[CrossRef][Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»