Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, October 2004, p. 3782-3788, Vol. 48, No. 10
0066-4804/04/$08.00+0 DOI: 10.1128/AAC.48.10.3782-3788.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Department of Therapeutic Medicine,1 Department of Molecular Bacteriology, Nagoya University Graduate School of Medicine, Nagoya, Japan,2 Division of Gastroenterology, Department of Medicine, Vanderbilt University Medical Center, Nashville, Tennessee3
Received 6 October 2003/ Returned for modification 20 January 2004/ Accepted 7 June 2004
|
|
|---|
|
|
|---|
Glycine is the simplest amino acid and has been used as an antibacterial agent in foods due to its low toxicity in animals. Although glycine is toxic to humans when it is given in large amounts, it also has antibacterial potential (11, 13, 33). For example, Lactococcus lactis subspecies failed to grow in medium containing more than 2% glycine (15). Furthermore, glycine concentrations of 1.5 to 6% resulted in 70 to 90% reductions in growth of Enterococcus faecalis (10). Glycine is known to inhibit the synthesis of a peptidoglycan component of the bacterial cell wall (16). Although the bacterial cell wall is thinner in gram-negative bacteria than in gram-positive bacteria, it is thought that the amount of glycine required to suppress bacillus proliferation is lower than that required to suppress gram-positive bacteria (30). However, the effect of glycine against H. pylori has not been well studied in detail.
The postantibiotic effect (PAE) is a phenomenon by which the inhibition of bacterial growth continues after exposure to an antimicrobial agent (8, 19, 25). It is classically defined as the period of bacterial growth suppression that persists after limited exposure of organisms to antimicrobials. The PAE may remain even after drug levels are no longer detectable. The duration of the PAE is of important clinical interest in establishing dosing schedules, particularly given that longer intervals between intermittent dosage schedules may reduce the toxicities of antibiotics (25). To date, however, the PAE of glycine against H. pylori has not been well studied and little information is available.
AMX, a beta-lactam antibiotic which inhibits the synthesis of a peptidoglycan of the cell wall, is also effective against H. pylori (6), albeit with an eradication rate when it is used alone that is lower than those of the other drugs used in combination (23), and AMX-resistant H. pylori are rare (1). The present study was conducted to determine the effect of glycine on H. pylori, especially CLR-resistant strains, and to evaluate the PAE of glycine and the effect of glycine in combination with AMX. The results obtained lead us to propose a new therapy for H. pylori eradication.
|
|
|---|
Bacterial strains and culture conditions. The susceptibilities to glycine of 31 H. pylori strains, including three standard strains (strains 26695 [37] and J99 [2] and a quality control strain [ATCC 43504] [27]), and clinical isolates (4, 28, 35, 38) were measured. The clinical isolates were from biopsy specimens of lesions obtained by endoscopy from different patients with gastroenterological diseases at Nagoya University Hospital and a regional health care center. Stock cultures of H. pylori were grown for 4 days on brucella broth agar (Difco, Detroit, Mich.) plates supplemented with 7% heat-inactivated fetal calf serum (FCS; Gibco BRL, Rockville, Md.) (BB agar) at 37°C in a microaerophilic atmosphere. Broth cultures of H. pylori were prepared from subcultures of colonies from freshly cultured agar plates placed into brucella broth (Difco) supplemented with 7% FCS (BB) for 3 days at 37°C in a microaerophilic atmosphere. The identification of H. pylori was confirmed by characteristic colony morphology, Gram staining, and positive reactions by urease, catalase and oxidase tests.
DNA techniques. Standard molecular biology-based techniques were used (29). H. pylori chromosomal DNA was prepared from cells of each strain after 48 h of growth on two agar plates and was extracted with a Wizard Genomic DNA Purification kit (Promega, Madison, Wis.), according to the instructions of the manufacturer.
Construction of isogenic mutant strains. CLR-resistant isogenic mutants were constructed by natural transformation methods (3, 29). Domain V of the 23S rRNA gene in H. pylori, which is associated with CLR resistance (32), was amplified by PCR. Template DNA was extracted from CLR-resistant strains 628 and 535 and was found to possess A-to-G point mutations at either position 2143 (strain 628) or position 2144 (strain 535) in domain V of the 23S rRNA gene. The PCR products from donor DNA samples were purified. Briefly, 1 ng of DNA was amplified with 100 pmol of the sense and antisense primers (sense primer, 5'-CCACAGCGATGTGGTCTCAG-3' [positions 1820 to 1839 of 23S rRNA sequence]; antisense primer, 5'-CTCCATAAGAGCCAAAGCCC-3' [positions 2244 to 2225 of the 23S rRNA sequence]) in a 50-µl reaction mixture containing 0.25 µl of Ex Taq polymerase (Takara Biomedicals, Ohtsu, Japan) for 25 cycles of 1 min at 94°C, 1 min at 55°C, and 1 min at 72°C in a DNA thermal cycler (GeneAmp PCR System 9700; Applied Biosystems, Foster City, Calif.). The presence of a single 425-bp band was verified on a 1% agarose gel, and the PCR products were purified with a QIAquick PCR Purification kit (Qiagen, Valencia, Calif.).
H. pylori strain 26695 was used as the transformation recipient. After 48 h of growth, recipient H. pylori cells were harvested from one BB agar plate and placed into 1 ml of phosphate-buffered saline (PBS) and then centrifuged at 8,500 x g for 5 min. The pellet was resuspended in 300 µl of PBS. Each transformation mixture, consisting of 25 µl of recipient cells and 1 µg of donor DNA, was spotted onto a BB agar plate (approximately 600 ng of DNA/25 µl of cells is a saturating amount of DNA). The plates were incubated overnight at 37°C in a microaerophilic atmosphere. After 18 h of incubation, the transformation mixture was spread onto BB agar containing 4 µg of CLR/ml. All plates were incubated for 5 days at 37°C in a microaerophilic atmosphere to select transformants (3). The presence of point mutations in the transformants was confirmed by PCR and direct sequencing (CEQ2000XL; Beckman Coulter Inc., Fullerton, Calif.).
Susceptibility testing. The susceptibilities of the CLR-resistant strains were determined by the agar dilution method (27). An MIC of more than 1 µg/ml was considered CLR resistance. The MIC of glycine was defined as the lowest concentration that inhibited the visible growth of isolates completely by the agar dilution method on Mueller-Hinton agar (Becton Dickinson and Company, Paramus, N.J.) plates supplemented with 5% aged sheep blood (Nippon Bio-Test Laboratories Inc., Tokyo, Japan) (M-H agar) (27). Briefly, all isolates were incubated for 4 days on BB agar. After this incubation, inocula were prepared by suspending growth from the BB agar plates with antimicrobial agents in saline to achieve a suspension equivalent to a 2.0 McFarland standard. Final inocula of 106 CFU/spot were applied to M-H agar or BB. All plates were incubated for 3 days at 35°C in a microaerophilic atmosphere, and the number of CFU was counted. In the liquid culture study, aliquots from each culture were applied to BB agar after 3 days of incubation of H. pylori at 37°C under microaerophilic conditions. After 4 days of incubation, the number of CFU was counted. The mean value for the log number of CFU per milliliter was plotted. By a second method, the minimal bactericidal concentrations (MBCs), defined as the lowest concentration of each antibiotic that completely killed the isolates, were determined by using liquid cultures with antimicrobial agents by a modification of the method of Sjöström et al. (31). The MBC of AMX with glycine was determined by serial dilution of AMX and glycine in BB in the presence of approximately 106 CFU/ml in 25-ml tissue culture flasks (Becton Dickinson and Company). After 3 days of incubation of H. pylori at 37°C under microaerophilic conditions, aliquots from each culture were applied to BB agar for determination of the MBC. After 4 days of incubation, the number of CFU was counted. AMX and glycine were tested at concentrations ranging from 0 to 75 ng/ml and 0 to 2.5 mg/ml, respectively. The MBCs were measured to study the effect of the interaction between AMX and glycine against strain 26695.
Determination of PAE.
The PAE on bacteria was measured by a modification of the method of Ibrahim et al. (19). After 4 days of growth of strain 26695 on BB agar, the bacteria were harvested, placed into PBS, and diluted with BB to
108 CFU/ml; and a final inoculum of 106 CFU/ml was applied to BB agar. Glycine was added to BB in a 25-ml tissue culture flask at a concentration of 1.25 mg/ml (five times the MIC). After incubation for 8 h, the antibiotics were removed by dilution 1:103 into fresh BB and the cultures were incubated for 24 h. Samples were collected for viable counts (numbers of CFU per milliliter) every 4 h, plated onto BB agar plates, and incubated for 4 days. Viability curves were then determined. The control culture, which was not exposed to any antimicrobial agents, was treated similarly. For quantification of the PAE, viable counts were determined before and after antibiotic exposure. The T C value was calculated as follows (8): T was the time required for the CFU count in the test culture to increase 10-fold above the count observed immediately after antibiotic removal, and C was the time required for the CFU count in an untreated control culture to increase 10-fold above the count observed immediately after completion of the same procedure for antibiotic removal used for the test culture.
Time-kill curve test.
The time course of the antibacterial effects was determined with strain 26695 (18). Briefly, bacteria cultured for 4 days on BB agar were diluted with fresh BB to
108 CFU/ml. A final inoculum of 106 CFU/ml was placed into a 25-ml tissue culture flask containing 10 ml of BB with glycine or both glycine and AMX. Broth cultures with glycine were incubated for 2 days at 37°C in a microaerophilic atmosphere. At 0, 12, 24, 36, and 48 h, samples were removed and 0.1 ml of 10-fold serial dilution was plated onto BB agar. Broth cultures with both glycine and AMX were incubated for 1 day at 37°C in a microaerophilic atmosphere. At 0, 6, 12, 18, and 24 h, samples were removed and 0.1 ml of 10-fold serial dilutions was plated onto BB agar. The number of colonies growing on the plates after 4 days of incubation was counted in both studies.
Statistical analysis. The degree of significance between means was determined by the paired t test. A P value of <0.01 was regarded as significant. These studies were repeated at least five times to confirm the reliability of the data.
|
|
|---|
Glycine MICs. The effect of glycine on 31 bacterial strains, including 10 CLR-resistant H. pylori strains, was examined. The glycine MICs for the 31 strains ranged from 1 to 2.5 mg/ml, while the concentrations required to inhibit 50 and 90% of the strains (MIC50 and MIC90, respectively) were 1.5 and 2.5 mg/ml, respectively. Glycine inhibited the growth of all strains tested, and no colonies were detected in M-H agar with glycine at more than 2.5 mg/ml. The MIC of glycine for the quality control strain (ATCC 43504) was same as that for strain 26695 (2.5 mg/ml). There was no difference in the glycine MIC for CLR-susceptible and -resistant strains. Furthermore, there was no association between the MIC of CLR and the MIC of glycine. The MIC of glycine for the experimental strain was dependent on that for the recipient strain (strain 26695), and the MICs for the isogenic mutant strains were the same as the MIC for strain 26695.
These data strongly suggest that the antibacterial mechanisms of glycine and CLR are independent. The addition of glycine resulted in a significant decrease in the number of bacteria. Furthermore, significant concentration-dependent suppression of bacterial growth was observed for both strains. However, there was no difference in the suppression of growth between the CLR-susceptible and -resistant strains, including the isogenic mutant strains (strains 26695:628 and 26695:535) (Fig. 1). In other words, glycine acted similarly against both CLR-resistant and -susceptible H. pylori.
![]() View larger version (10K): [in a new window] |
FIG. 1. Comparison of the inhibitory effects of glycine against CLR-susceptible and CLR-resistant H. pylori strains. H. pylori strains were treated with the indicated concentrations of test compound for 3 days. The mean value for the log number of CFU per milliliter of all CLR-susceptible and all CLR-resistant H. pylori strains at each concentration was plotted. Glycine was used at concentrations of 0, 0.5, 1, 1.5, 2.0, and 2.5 mg/ml. Representative results from five independent experiments are shown. Symbols: , CLR-susceptible strains; , CLR-resistant strains.
|
![]() View larger version (13K): [in a new window] |
FIG. 2. Time-kill curve experiment with glycine and H. pylori 26695. H. pylori was inoculated into BB with glycine and incubated at 37°C for 2 days. Glycine in BB was added to the cultures at the start of incubation. The mean values for the log number of CFU per milliliter versus time for H. pylori were tested with different concentrations of glycine. At 12-h intervals after drug addition, aliquots of each culture were spread onto BB agar for determination of the number of CFU. Representative results from five independent experiments are shown. Symbols: , glycine at 0 mg/ml; , glycine at 1 mg/ml; , glycine at 2.5 mg/ml; , glycine at 5 mg/ml; , glycine at 10 mg/ml.
|
![]() View larger version (11K): [in a new window] |
FIG. 3. Inhibitory effects of various concentrations of glycine and AMX on H. pylori 26695. H. pylori was treated with the indicated concentrations of the test compounds for 3 days. AMX was used at concentrations of 0 to 75 ng/ml. Glycine was used at concentrations of 0, 0.5, 1, and 2.5 mg/ml. The mean value for the log number of CFU per milliliter at each concentration was plotted. Representative results from five independent experiments are shown. Symbols: , glycine at 0 mg/ml with AMX; , glycine at 0.5 mg/ml with AMX; , glycine at 1 mg/ml with AMX; , glycine at 2.5 mg/ml with AMX.
|
![]() View larger version (11K): [in a new window] |
FIG. 4. Time-kill curve experiments with glycine-AMX and H. pylori 26695. H. pylori was inoculated into BB with glycine and incubated at 37°C for 24 h. Glycine and AMX in BB were added to cultures at the start of incubation. The mean values for the log of the number of CFU per milliliter versus time for H. pylori were tested with different concentrations of glycine and AMX. At 6-h intervals after drug addition, aliquots from each culture were spread onto BB agar plates for determination of the numbers of CFU. Representative results from five independent experiments are shown. Symbols: , glycine at 0 mg/ml; , glycine at 10 mg/ml; , at glycine at 2.5 mg/ml with AMX at 7.5 ng/ml; , AMX at 75 ng/ml.
|
|
|
|---|
The inhibition of proliferation of H. pylori was dependent on the glycine concentration. Furthermore, the MBC of AMX decreased to 1/10 when it was used together with glycine, suggesting that glycine may have a synergistic effect with AMX. Cell wall synthesis involves a number of available active enzymes, such as DD- and DL- carboxypeptidases, which are important for the formation of cell wall-bound peptidoglycan. Because glycine inhibits LD-carboxypeptidase, the modifying effect of glycine on cell wall synthesis was explained to be largely due to this mechanism. Beta-lactam antibiotics are capable of inhibiting not only DL-carboxypeptidases but also DD-carboxypeptidases, which are required for the synthesis of cross-linked peptidoglycan in Gaffkya homari (14). Given these observations, we assume that the synergism of glycine in increasing the antimicrobial efficacies of beta-lactam antibiotics is mainly due to its inhibition of this enzyme system (11). However, H. pylori murein lacks LD-cross-linked-carboxypeptidase muropeptides, and H. pylori may not have LD-carboxypeptidases (22). We therefore hypothesize that the synergism of AMX and glycine against H. pylori involves AMX inhibition of DL- or DD-carboxypeptidases and glycine mainly inhibits UDP-N-acetylmuramate-alanine ligase.
Appropriate antibiotic use remains central to achieving the optimum outcomes for infected patients and infection control. PAE and postexposure events are clearly relevant to achieving these goals. In this study, glycine showed no PAE against H. pylori, and in general, beta-lactam antibiotics are not thought to possess PAEs (8). Glycine's lack of a PAE may be related to the similarity of its antibacterial mode of action to those of beta-lactams, namely, its inhibition of cell wall synthesis. The full clinical relevance of PAE studies and how they may influence glycine dosing regimens for H. pylori eradication therapy remain matters for future research. No reports of notably glycine-tolerant strains have been presented, and no strains for which glycine MICs varied were found in the present study. Glycine significantly reduced the number of both CLR-sensitive and -resistant H. pylori isolates. This result shows that the mechanism of resistance to CLR, namely, point mutation in the V domains (36), is not associated with the antibacterial mechanism of glycine and suggests that glycine has effective activity against CLR-resistant strains.
A full understanding of the antibacterial mechanism of glycine and the establishment of a new eradication therapy based on that mechanism await further investigations. However, the results presented here open new avenues toward more effective eradication therapy for H. pylori and suggest that the administration of a combination of a proton pump inhibitor, AMX, and glycine deserves further evaluation.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»