Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, February 2007, p. 673-678, Vol. 51, No. 2
0066-4804/07/$08.00+0 doi:10.1128/AAC.00802-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.
Fakultät für Biologie, Lehrstuhl für Genetik, Universität Bielefeld, Postfach 100131, D-33501 Bielefeld, Germany
Received 4 July 2006/ Returned for modification 19 August 2006/ Accepted 30 October 2006
|
|
|---|
|
|
|---|
Besides ß-lactams, aminoglycosides, and fluoroquinolones, macrolide antibiotics, characterized by 14-, 15-, and 16-membered lactone ring systems, are among the most frequently administered antimicrobial drugs (2-4, 15, 30). They are effective against gram-positive bacteria as well as against some gram-negative bacteria (34, 37, 46) and are often used to treat community-acquired respiratory tract infections, skin and soft tissue infections, Legionnaires' disease, and venereal diseases (1, 8, 21, 24, 26, 36). Macrolides inhibit protein synthesis by binding to the 50S ribosomal subunit (15), and resistance to this class of antibiotics is mainly attributed to target site modifications (44), active efflux (38), or modification of the drug itself (13, 38). A number of different macrolide resistance genes have been identified in gram-positive bacteria as well as in gram-negative bacteria (33).
Wastewater treatment plants were identified as dissemination hot spots for resistance determinants. Antibiotic-resistant bacteria, resistance genes, and mobile genetic elements carrying resistance determinants are frequently isolated from bacterial communities residing in wastewater treatment plants (12, 27, 39, 40, 42, 43). Different erythromycin resistance plasmids obtained from among those antibiotic resistance plasmids from sewage bacteria were previously analyzed at the genomic level. For example, promiscuous, conjugative IncP-1ß plasmid pB4 encodes a tripartite multidrug efflux system, consisting of an efflux permease, a periplasmic membrane fusion protein, and an outer membrane factor, which mediates high-level erythromycin and roxithromycin resistance (41). In contrast, the non-IncP plasmids pRSB101 and pRSB107, which were isolated from activated-sludge bacteria by a transformation-based approach, harbor the macrolide resistance determinant mph(A)-mrx-mphR(A) (39, 40). The mph(A) gene encodes a macrolide-2'-phosphotransferase I, and Mrx was predicted to be a hydrophobic transmembrane transport protein.
These findings motivated the search for mobile erythromycin resistance plasmids in the final effluents of a municipal wastewater treatment plant. Here we describe the new macrolide resistance determinant of the mobile, broad-host-range IncP-1ß plasmid pRSB111 at the genomic level and its functional characterization.
|
|
|---|
mcr (19) containing the vector pBCSK (a derivative of pBluescript carrying a chloramphenicol resistance gene; Stratagene) with the cloned pRSB111 erythromycin resistance-conferring region was grown in Luria broth (LB) medium supplemented with erythromycin (300 µg/ml) at 37°C. Pseudomonas sp. strain B13 GFP1 (11, 14) containing the resistance plasmid pRSB111 was grown in LB medium supplemented with erythromycin (300 µg/ml) at 30°C. Exogenous isolation of plasmids from bacteria of final effluents. A sample (1 liter of water) from the final effluents of the wastewater treatment plant Bielefeld-Heepen (Germany) was taken in April 2003. The bacteria in the sample were collected by centrifugation. Exogenous isolation of plasmids from the bacteria in the final effluents was done in three parallel mating experiments with Pseudomonas sp. strain B13 GFP1 as the recipient strain, as described previously (12). Pseudomonas sp. strain B13 transconjugants which potentially received a plasmid from endogenous bacteria of the final effluents were selected on LB medium containing gentamicin (30 µg/ml), kanamycin (50 µg/ml), and erythromycin (300 µg/ml).
Determination of resistance patterns. Antimicrobial susceptibility testing was done according to the standards outlined by the Clinical and Laboratory Standards Institute (5). Antimicrobial disk diffusion assays were done by using the following disks purchased from Oxoid GmbH (Wesel, Germany): azithromycin (AZM15), clarithromycin (CLR15), clindamycin (DA10), erythromycin (E30), and lincomycin (MY15). The antibiotics roxithromycin (ROX15) and tylosin (TY30) were purchased from Mast Diagnostica GmbH (Reinfeld, Germany). MIC tests were performed as described by Dröge et al. (12).
Transfer activity of plasmid pRSB111.
Transfer tests with plasmid pRSB111 were done as described previously (12). Ralstonia eutropha GFP3 (a ß-proteobacterium) (43), Pseudomonas sp. strain B13 GFP1 (a
-proteobacterium) (11, 14), and E. coli CV60 (a
-proteobacterium) (40) were used as the recipients in mating experiments. Selection of transconjugants was done on LB medium containing kanamycin (50 µg/ml) and erythromycin (300 µg/ml). All recipients used here are resistant to kanamycin, and plasmid pRSB111 confers erythromycin resistance. The transfer frequencies for each recipient were calculated.
Standard DNA techniques.
The plasmid content of the transconjugants was checked by Eckhardt analysis (23), and plasmid DNA was isolated from Pseudomonas sp. strain B13 GFP1(pRSB111) by using the Nucleobond kit PC100 and AX100 columns (Macherey-Nagel, Düren, Germany), according to the protocol supplied by the manufacturer. Recombinant pBCSK derivatives were isolated by using a QIAprep spin miniprep kit (QIAGEN, Hilden, Germany), according to the manufacturers' instructions. Restriction fragments were extracted from agarose gels by use of the Sephaglas BandPrep kit (Amersham Pharmacia Biotech, Freiburg, Germany). Restriction enzyme digestion, agarose gel electrophoresis, DNA cloning, and transformation of E. coli DH5
were carried out as described by Sambrook et al. (35). The IncP-1-specific PCR with trfA-specific primers was carried out as described by Götz et al. (18). The mph(A)-specific PCR was done as described by Szczepanowski et al. (40).
Sequencing of pRSB111 8-kb NotI restriction fragment and annotation. Purified plasmid pRSB111 DNA was restricted with the restriction endonuclease NotI. An 8-kb NotI restriction fragment was subcloned into the vector pBCSK. Subfragments of the NotI fragment were generated by using the enzymes BamHI, EcoRI, PstI, and SphI and were cloned into pZErO-2 (Invitrogen, Karlsruhe, Germany), pGEM-T Easy (Promega Corporation, Madison, WI), and pUC19 (45). Sequencing of recombinant plasmids was achieved by using standard and walking primers and ET-Dye Terminator mix chemistry (Applera; Applied Biosystems). The extension products were separated on an ABI 377 sequencer (IIT Biotech GmbH, Bielefeld, Germany). Gap closure and polishing of the sequence were done by applying a primer walking strategy with appropriate restriction fragment clones. Computer-assisted assembly and sequence quality control were carried out with the CONSED/AUTOFINISH software tool (16, 17). Annotation of the finished sequence was done by using the GenDB (version 2.2) annotation tool (29).
Amplification and cloning of individual genes encoded in pRSB111 macrolide resistance-conferring region. Individual genes of the pRSB111 macrolide resistance-conferring region were amplified by PCR. The primer pairs used and the corresponding amplicon sizes are listed in Table 1. The amplicons were restricted with BamHI and cloned into the BamHI-digested pUC18 vector (45). The identities of the cloned fragments and their orientations within the vector were verified by digestion with different restriction enzymes. All genes were cloned in the sense orientation with respect to the lac promoter of pUC18. The original ribosomal binding sites of each gene were retained. PCRs were done under standard conditions with the proofreading polymerase Pfu (Fermentas, St. Leon-Rot, Germany).
|
View this table: [in a new window] |
TABLE 1. Primer pairs used to amplify individual genes of the pRSB111 macrolide resistance region and expected amplicon sizes
|
|
|
|---|
Plasmid pRSB111 is closely related to prototype IncP-1ß resistance plasmid pB3. Restriction of plasmid pRSB111 with the restriction enzyme NotI elucidated that its restriction pattern is very similar to that of prototype IncP-1ß plasmid pB3, which was previously isolated from an activated-sludge bacterial community of a wastewater treatment plant (12, 22). The NotI patterns of the two plasmids differed by only one restriction fragment. Plasmid pRSB111 possesses an 8-kb fragment that is missing in the pB3 pattern. Instead, pB3 contains a 17-kb NotI fragment that is known to contain the accessory region of the plasmid. It could therefore be assumed that the 8-kb NotI fragment of pRSB111 represents the resistance gene region of this plasmid. To confirm that pRSB111 is a member of the IncP-1ß plasmid family, part of its replication initiation gene, trfA, was amplified by using IncP-1 trfA-specific primers (18). Sequencing of the amplicon obtained showed that the trfA nucleotide sequence is nearly identical (99.6%) to the corresponding sequence of plasmid pB3 (22).
Plasmid pRSB111 apparently does not harbor the mph(A) erythromycin resistance gene since it could not be detected on the plasmid genome by PCR. The mph(A) gene was previously identified on many other plasmids originating from activated-sludge bacteria (40). Therefore, we decided to subclone the pRSB111 8-kb NotI fragment containing the new erythromycin resistance determinant for complete nucleotide sequencing.
The accessory region on plasmid pRSB111 contains a new macrolide resistance operon. The complete nucleotide sequence of the 8-kb NotI fragment subcloned from pRSB111 was determined. The left-hand part of the sequenced fragment contains the IncP-1-specific genes 'trbP (mating pair formation), upf30.5 (unknown function), upf31.0 (restriction protection), and parA (multimer resolution). A 2,430-bp region spanning 'trbP to parA is 100% identical to the corresponding segment on pB3, demonstrating that both plasmids are very closely related (Fig. 1). Plasmid pRSB111 contains a copy of insertion sequence (IS) ISPa15 inserted 166 bp upstream of parA. The element is bordered by inverted repeat motifs that are nearly identical to the IRi and IRt inverted repeat (IR) ends of class 1 integron-containing Tn402 transposons. The parA upstream region seems to represent a hot spot for the insertion of mobile elements related to Tn402 since plasmid pB3 contains an insertion of a so-called cryptic integron 253 bp upstream of parA (22). ISPa15 elements were previously found on the conjugative IncU tetracycline resistance plasmid pFBAOT6 of Aeromonas punctata isolated from hospital effluent (32) and the clinical Pseudomonas aeruginosa IncP-6 plasmid Rms149 (20), which could mean that the original pRSB111 host bacterium, A. punctata, and P. aeruginosa share a common pool of mobile genetic elements. The occurrence of ISPa15 on plasmids of different incompatibility groups isolated from different hosts in different countries (Aeromonas punctata harboring pFBAOT6 was isolated in the United Kingdom, whereas Pseudomonas aeruginosa carrying Rms149 originates from Frankfurt, Germany) indicates the wide dissemination of this element and/or of cognate plasmids.
![]() View larger version (16K): [in a new window] |
FIG. 1. Comparison of the accessory resistance-conferring regions of plasmids pB3 (22), pRSB111, and pRSB101 (40). Coding regions are shown as arrows indicating the direction of transcription. Genes 'trbP, upf30.5, upf31.0, and parA represent IncP-1ß-specific backbone module genes (blue). Plasmid pRSB111 contains the macrolide resistance-conferring module mphR(E)-mph(E)-mrx(E) (yellow) flanked by insertion sequences (ISPa15 and ISRSB111). Two truncated transposable elements (IS6100 and Tn3-like elements) were identified in the vicinity of ISRSB111. Plasmid pB3 contains a class 1 integron (red) composed of the integrase gene intI1, the resistance gene cassettes cmlA1 and aadA2, and the 3' conserved module genes qacE 1, sul1, orf5, and orf6. The pB3 integron is flanked by a copy of IS6100 (green) downstream of orf6. Upstream of parA pB3 carries an insertion of a so-called cryptic integron (light blue), consisting of the ß-lactamase gene blaNPS-2 and the resolvase gene tniC. Dashed lines between plasmids pB3 and pRSB111 indicate regions showing 100% nucleotide sequence identity. The macrolide resistance-conferring region of plasmid pRSB101 is flanked by the insertion sequences IS26 (lilac) and IS6100. Homologous regions of plasmids pRSB111 and pRSB101 are marked by dashed lines, and the numbers above the pRSB101 macrolide resistance-conferring genes indicate the identities and similarities of the encoded gene products to the corresponding proteins of pRSB111. Terminal IRs of transposable elements are symbolized by rectangles.
|
On the right-hand side the macrolide resistance-conferring region is bordered by the insertion sequence ISRSB111, which encodes a transposase (COG3293) that is 89% identical to a putative transposase from Paracoccus denitrificans (GenBank accession no. ZP_00629048). Inverted repeats could not be identified in the vicinity of the ISRSB111 tnpA gene. Thus, it appears that the pRSB111 macrolide resistance-conferring region is flanked by IS elements (ISPa15 and ISRSB111) on each side, which resembles the arrangement of the macrolide resistance operon mph(A)-mrx-mphR(A), which is flanked by IS26 and IS6100 (Fig. 1). IS elements therefore could have played an important role in the acquisition of the erythromycin resistance determinants. ISRSB111 inserted into a copy of IS6100, thereby deleting the 5' part of the corresponding transposase gene tnpAIS6100. On the right-hand side, IS6100 is terminated by the IS6100-specific inverted repeat motif (Fig. 1). Insertion of IS6100 truncated another transposable element that is related (96% identity) to a Tn3 family transposon present on pFBAOT6 from Aeromonas punctata (32). The Tn3-like transposon transposed into the terminal end (IRt end) of a Tn402-like element that had probably been present on the pRSB111 ancestor plasmid. The remaining part of the NotI fragment sequenced (251 bp), including two IRt motifs, is completely identical to the corresponding region of pB3, again supporting the possibility that pRSB111 and pB3 derived from a common ancestor plasmid that already contained two interleaved, nested Tn402-like elements. Starting from a common ancestor, evolution of the accessory module on pRSB111 might have involved subsequent insertions of two transposable elements (namely, a Tn3-like transposon and IS6100), the incorporation of a module containing the macrolide resistance-conferring region, and the deletion of most of the Tn402 derivative. In contrast, the accessory module on pB3 contains a Tn402-based class 1 integron consisting of the integrase gene intI1, a resistance gene cassette region, and an integron-specific 3' conserved segment (Fig. 1). Insertion of additional resistance-conferring modules into the integron platform seems to occur very frequently, thus facilitating extension of antibiotic resistance-conferring regions (22, 25, 31, 39, 40).
The pRSB111 resistance-conferring region confers resistance to the macrolides azithromycin, clarithromycin, erythromycin, roxithromycin, and tylosin. Plasmid pRSB111 contains a so far unknown macrolide resistance-conferring region. Therefore, we analyzed the mediated resistance profile using the macrolides azithromycin, clarithromycin, erythromycin, roxithromycin, and tylosin, as well as the lincosamines clindamycin and lincomycin, in a disk diffusion assay. The pRSB111-encoded macrolide resistance-conferring region confers resistance to the macrolide antibiotics tested but not to the lincosamines tested (data not shown).
Since the pRSB111 macrolide resistance-conferring region shows weak similarity to the corresponding region on the multiresistance plasmid pRSB101, we performed MIC tests using both plasmids to investigate possible differences in their resistance profiles. MIC tests were done with erythromycin, roxithromycin, and tylosin (Table 2). Both plasmids conferred high-level erythromycin and roxithromycin resistance to the host bacterium, Pseudomonas sp. strain B13 GFP1, while only pRSB111 was able to decrease the strain's susceptibility to tylosin.
|
View this table: [in a new window] |
TABLE 2. MICs mediated by macrolide resistance plasmid pRSB111 compared to those conferred by multiresistance plasmid pRSB101
|
, tylosin MICs could not be determined for the constructs.
![]() View larger version (7K): [in a new window] |
FIG. 2. Contributions of selected genes encoded in the pRSB111 macrolide resistance-conferring region to the erythromycin and roxithromycin resistance phenotype. The coding regions of mphR(E), mph(E), and mrx(E) are indicated by arrows. Promoter structures upstream of mphR(E) and mph(E) are marked by little arrows. The bars below the genetic map represent fragments of the macrolide resistance-conferring region that were amplified by PCR and cloned into vector pUC18. The MICs for E. coli strain DH5 carrying the different recombinant plasmids and pUC18 (control) are given on the right.
|
Plasmid pRSB111 is self-transmissible and has a broad host range.
Restriction analysis of the plasmids pB3 and pRSB111 showed that their backbones, including the conjugative transfer (tra) and mating pair formation (trb) modules, are conserved. For plasmid pB3 it is known that it transfers at high frequencies between different classes of proteobacteria (22). To examine the transfer properties of plasmid pRSB111, mating experiments with different recipient strains were done. Plasmid pRSB111 transfers at high frequencies from E. coli DH5
to E. coli CV60 (1.05 x 101) and Pseudomonas sp. strain B13 GFP1 (6.1 x 102) and transfers at a lower frequency to Ralstonia eutropha GFP3 (1.4 x 106). Different studies have shown that plasmid transfer greatly depends on the plasmid donor and recipient strains (9, 10, 22). The transfer frequencies of pRSB111 are comparable to those of other IncP-1ß resistance-conferring plasmids isolated from wastewater treatment plant bacteria (12, 22). Consequently, pRSB111 was also classified as a highly mobile, self-transmissible broad-host-range plasmid.
Published ahead of print on 13 November 2006. ![]()
|
|
|---|
plasmid pTB11 from a waste-water treatment plant reveals a highly conserved backbone, a Tn402-like integron and other transposable elements. Plasmid 53:218-238.[CrossRef][Medline]This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»