Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, April 2007, p. 1446-1454, Vol. 51, No. 4
0066-4804/07/$08.00+0 doi:10.1128/AAC.01088-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Health Protection Agency West Midlands Public Health Laboratory, Heart of England NHS Foundation Trust, Birmingham B9 5SS, United Kingdom,1 Division of Immunity and Infection, University of Birmingham, Birmingham B15 2TT, United Kingdom,2 Prince of Wales Hospital, Hong Kong3
Received 29 August 2006/ Returned for modification 27 October 2006/ Accepted 21 December 2006
|
|
|---|
|
|
|---|
The diversity and increasing prevalence of CTX-M-type ESBLs presents an increasingly complex molecular epidemiological scenario in the United Kingdom (23). While CTX-M-15 has been dominant, we have noted an increasing number of the genotypes, particularly CTX-M-14 (Li Xu, unpublished observation). There is, therefore, a pressing need for high-throughput, low-cost methods for the identification of specific genotypes of CTX-M ß-lactamase genes. Various molecular methods, including multiplex PCR, have successfully been applied to the detection of all members of all five groups (36, 39). However, without full DNA sequencing, precise genotype characterization of CTX-M-type ß-lactamase genes remains a challenge. Currently, sequencing is the only method for definitive identification, but it is time-consuming and expensive.
Denaturing high-performance liquid chromatography (dHPLC) is a relatively new, powerful technique for the detection of genetic variation. The principle behind this technology has been described in detail elsewhere (38). It has successfully been used extensively for the analysis of mutations in disease-related genes (13, 20). In recent years, the technique was first developed for bacterial identification and molecular typing and has subsequently been applied to the detection of a variety of mutations in antibiotic resistance-conferring genes, such as mutations in gyrA and grlA in Staphylococcus aureus, Salmonella, Yersinia pestis, and Neisseria gonorrhoeae (10, 14, 17). The identification of mutations associated with antituberculosis drug resistance in rpoB, katG pncA, rpsL, and embB has also been reported (9, 32). The aim of our study was to establish a sensitive, rapid, and high-throughput genotyping assay for the screening of CTX-M-type ESBLs. The dHPLC genotyping method consists of three steps: separate amplification of both reference and clinical isolates of DNA by multiplex PCR, heteroduplex formation between reference and sample PCR products, and analysis of heteroduplex DNA by dHPLC. We first developed the technique with blaCTX-M-producing control strains from the four groups and then evaluated the assay with a blinded panel of 62 previously characterized clinical isolates (39). Finally, the dHPLC assay was applied to explore the prevalence of diverse CTX-M-type ESBLs in our hospital in a 4-month survey carried out from September to December 2005 in Heartlands Hospital, Birmingham, United Kingdom.
|
|
|---|
|
View this table: [in a new window] |
TABLE 1. Control strains used to evaluate the dHPLC genotyping assay
|
Multiplex PCR detection of blaCTX-M genes. All isolates were initially screened for the presence of blaCTX-M by our previously described mutiplex PCR protocol (39), except that Optimase proofreading DNA polymerase (Transgenomic Inc., Omaha, NE) was used. Four sets of primers were used to amplify fragments of blaCTX-M open reading frames of CTX-M-type ESBLs, which are designed to give product sizes of 341 bp (group 2), 293 bp (group 9), 255 bp (group 1), and 207 bp (groups 25/26 and 8).
Heteroduplex formation and dHPLC analysis. Representative control strains (confirmed by DNA sequencing) GZ3 (CTX-M-3), Y19 (CTX-M-9), J1 (Toho-1), and ESBL530 (CTX-M-25) were used as reference standards for groups 1, 9, 2, and 25/26, respectively. PCR products (5 µl) of either the control or the clinical isolates were mixed with an equal amount of DNA amplified from a reference standard to ensure that consistent peak heights (absorbance, minimum of 2 mV) were observed between different runs. The mixtures were heated to 95°C for 5 min and then gradually cooled to 25°C at a rate of 1°C/min to form homo- and heteroduplex DNA molecules.
Aliquots of 5 to 8 µl of each duplexed PCR product were loaded onto a DNAsep column in a WAVE 4500 DNA fragment analysis system (Transgenomic Inc.). The linear dHPLC acetonitrile gradient consisted of buffer A (0.1 M triethylamine acetate) and buffer B (0.1 M triethylamine acetate, 25% acetonitrile). The injected DNA was eluted at a flow rate of 1.5 ml/min for 3.3 min with a specific concentration of buffer B and was detected by measurement of the absorbance at 260 nm.
The gradient conditions and the heteroduplex analysis temperature required to obtain a successful resolution of the heteroduplex were predicted with Navigator software (Transgenomic, Inc.) and the dHPLC Melt Program developed at Stanford University (http://insertion.stanford.edu/melt.html) by using the reference amplicon sequences. The results were shown in the form of chromatographic peaks. The chromatographic peaks for controls, the blind test evaluation panel, and the unknown blaCTX-M type were compared with each other by visual inspection and with the reference homoduplex peak, which was obtained by reannealing of an equal amount of reference PCR products.
DNA sequence analysis. The dHPLC genotyping results were further confirmed by DNA sequencing of a limited number of isolates (10 of 78) from the 4-month survey study. PCR fragments covering the whole open reading frame of the relevant blaCTX-M gene were cleaned by using a QIAquick PCR purification kit (QIAGEN). One hundred nanograms of the PCR product was used as the template for TaqCycle sequencing with an ABI Prism BigDye Terminator (version 3.0) cycle sequencing kit. The cycle sequencing products were analyzed on an ABI PRISM 3700 DNA analyzer (Functional Genomics Laboratory, University of Birmingham).
|
|
|---|
|
View this table: [in a new window] |
TABLE 2. DNA sequence variations among PCR amplicons of blaCTX-M groups generated by multiplex PCR
|
To obtain the optimal temperature for the detection of single nucleotide or multiple sequence variations between reference blaCTX-M strains and other representative control strains within the group, all samples were initially analyzed at a wider range of temperatures up to ±3°C of the predicted highest and lowest temperatures in order to achieve the best resolution of heteroduplexes. The reference strains analyzed in the four groups produced a single peak at all temperatures tested (i.e., a true homoduplex). The dHPLC patterns of PCR amplicons containing sequence variations showed significant deviations from the corresponding elution profile of the reference amplicon. Alterations in the dHPLC chromatogram profile were observed at different temperatures. As the analysis temperature increases, the peak reduces in height and broadens in width. An example of a single nucleotide substitution (AGG to AGC), which resulted in an Arg-to-Ser 275 change between blaCTX-M-Toho-1 (the reference strain) and blaCTX-M-2 within group 2, is shown in Fig. 1. In contrast to the samples containing the blaCTX-M-Toho-1 reference sequence, which shows a single peak of a homoduplex DNA profile at all temperatures tested (Fig. 1A), Fig. 1B depicts the blaCTX-M-2 dHPLC signatures (three or two peaks) when the melting temperature was raised from 62°C to 63 and 65°C. Although the predicted temperatures were 63.1°C/62°C, the highest detection efficiency for blaCTX-M-2 was observed to be 64°C.
![]() View larger version (8K): [in a new window] |
FIG. 1. Effect of column temperature on sequence variation detection by dHPLC. dHPLC profiles. (A) blaCTX-M-Toho-1 (the homoduplexed reference strain) with a single peak observed at all temperatures between 62°C and 65°C; (B) heteroduplexed blaCTX-M-2. The single nucleotide substitution (AGG to AGC) was detected at both 64°C and 65°C as three and two peak profiles, respectively.
|
|
View this table: [in a new window] |
TABLE 3. Temperature titration used to identify optimum temperature at which clear dHPLC chromatograms are seen
|
![]() View larger version (23K): [in a new window] |
FIG. 2. dHPLC genotyping of blaCTX-M genes at different column temperatures. The single optimal temperature for differentiation of blaCTX-M variants within each group is boxed. The single peak profile of the reference strain (marked with an asterisk) for each group is shown only at the optimal temperature. (A) Genotyping of group 1 blaCTX-M genes; (B) genotyping of group 2 blaCTX-M genes; (C) genotyping of group 9 blaCTX-M genes; (D) genotyping of group 25/26 blaCTX-M genes.
|
dHPLC evaluation with clinical isolates. A total of 62 clinical isolates carrying sequences confirmed to be known blaCTX-M genes from a previous study (39) were subjected to blinded dHPLC analysis in order to assess the reproducibility and the sensitivity of the dHPLC genotyping method. The collection included clinical isolates from groups 1, 9, and 25/26. No group 2 clinical isolates were available to us. Our dHPLC assay correctly genotyped all 62 isolates, with 53 showing characteristic chromatogram profiles that were different from the profile for the reference strain of each group and from each other. All isolates carrying the same blaCTX-M gene had indistinguishable profiles (results not shown). For the remaining nine isolates, dHPLC typing showed single peak profiles corresponding to those for the reference strains: six isolates with profiles corresponding to blaCTX-M-9 and three isolates with profiles corresponding to blaCTX-M-3. The overall dHPLC typing results were 100% compatible with the data obtained by sequencing in our previous study (39).
Molecular typing of blaCTX-M genes from the 4-month survey by dHPLC analysis. During the 4-month period from September to December 2005, a total of 2,562 nonduplicate isolates of the family Enterobacteriaceae were processed in the clinical diagnostic service in the Birmingham Public Health Laboratory, Heartlands Hospital. A total of 78 ESBL producers were identified (3%), including 52 of 1,236 (4.1%) strains from hospitals and 26 of 1,326 (2%) strains from the community. The majority of the 78 clinical isolates were associated with urinary tract infections (66 [84%] strains); but they were also isolated from 6 sputum samples (7.8%), 3 cases of bacteremia, 2 wound infections, and 1 ascitic fluid sample. Multiplex PCR screening for the presence of blaCTX-M genes yielded amplicons of the expected size from 73 of 78 isolates. The five blaCTX-M PCR-negative isolates were further screened by a blaSHV PCR, and three isolates were positive. The remaining two isolates may have possessed ESBLs other than CTX-M and SHV. Of the 73 blaCTX-M-producing isolates, 71 belonged to blaCTX-M group 1 and 2 were found to harbor group 9 blaCTX-M genes. By using blaCTX-M-3 as the reference strain, the dHPLC genotyping of group 1 isolates at the two column temperatures of 64°C and 65°C revealed that 70 (95.8%) had blaCTX-M-15-specific elution profiles at 65°C and that 1 had the blaCTX-M-1-specific three-peak pattern at both 64°C and 65°C. The two group 9 isolates depicted a blaCTX-M-14-specific chromatogram signature when their patterns were compared with that of the blaCTX-M-9 control (results not shown). The clinical sites, the distribution of species, and the CTX-M genotypes are summarized in Table 4. All 70 blaCTX-M-15-producing isolates yielded identical profiles, and Fig. 3 demonstrates the signature matching between the CTX-M-15 control and the clinical isolates from the 4-month survey producing the blaCTX-M-15 gene. Seven of 70 (10%) that typed as CTX-M-15 ß-lactamase producers by dHPLC, as well as isolates which possessed blaCTX-M-1 and blaCTX-M-14, were sequenced. The genotypes predicted by dHPLC were verified by the sequencing results (sequences with GenBank accession no. DQ915953, DQ915954, and DQ915955).
|
View this table: [in a new window] |
TABLE 4. Bacterial species, specimen type, and distribution of blaCTX-M and blaSHV genotypes among 78 ESBL clinical isolates
|
![]() View larger version (17K): [in a new window] |
FIG. 3. Overlay of dHPLC signatures to assess reproducibility of characteristic features of CTX-M-15. The top chromatogram is the CTX-M-15 control signature and is compared to signatures from two blaCTX-M-15-producing clinical isolates from the survey.
|
|
|
|---|
The dHPLC technology is typically used to detect point mutations in DNA sequences by comparing the chromatograms of a wild-type (reference) strain and an experimental sample. Phylogenetic analysis of the target gene (blaCTX-M) has allowed the definition of five distinct groups which show very limited cross-group sequence homology. In addition, within each of these groups as many as 20 mutational changes have been seen between two members. The lack of sequence homology between different phylogenetic groups also precludes identification of a single PCR target that will facilitate cross-group discrimination. To accommodate these features of blaCTX-M variation, we have developed a multiplex PCR-based approach (39).
The principle of the dHPLC typing strategy applied in this study is illustrated for group 1 blaCTX-M isolates in Fig. 4. When dHPLC is applied to the genotyping of highly variable genes, such as blaCTX-M, the choice of the reference strain is crucial. For the typing of group 1 isolates, GZ3 carrying blaCTX-M-3 was selected as the reference strain because in the United Kingdom blaCTX-M-15-producing isolates account for greater than 95% of all CTX-M-type ESBLs from both community and hospital patients. The blaCTX-M-15 gene contains a single nucleotide substitution (A725 to G725) compared to the sequence of blaCTX-M-3, which leads to the Asp-240-Gly change (by the numbering system of Ambler et al. [2]). This mutation has been shown to increase hydrolytic activity against ceftazidime (5) and can be readily discriminated from blaCTX-M-3 by dHPLC (Fig. 2A). It is worth mentioning that three other group 1 strains, CTX-M-28, -29, and -33, also differ from CTX-M-3 by a single nucleotide (A750 to G750) within the PCR amplicon. However, these three strains are rare variants. CTX-M-33 and CTX-M-29 have been reported in only one E. coli strain each in Greece and China, respectively (40). Since the first report of its isolation in France, CTX-M-28 has appeared in only one Chinese hospital. Given the fact that CTX-M-15 is the predominant group 1 genotype in the United Kingdom, the chromatogram obtained by dHPLC very likely predicts the presence of blaCTX-M-15. Therefore, we believe that our dHPLC typing technique is robust enough to serve as a rapid screening genotyping method; and in an outbreak of CTX-M-type ESBL infection, sequencing of a proportion of the isolates should be undertaken in order to confirm the blaCTX-M genotypes of the outbreak strains (Fig. 4). In addition to allowing the sensitive identification of the blaCTX-M-15 genotype, Fig. 2A also shows the high sequence-specific discriminatory power of the dHPLC technique, in which other subtypes of group1 blaCTX-M variants can be distinguished from those of the reference strain and each other on the basis of their chromatogram profiles.
![]() View larger version (28K): [in a new window] |
FIG. 4. Algorithm for dHPLC genotyping of blaCTX-M-producing ESBLs in a clinical laboratory.
|
The blinded validation with 62 clinical blaCTX-M producers from our previous study showed that dHPLC genotyping was able to assign all of the strains to the correct genotype.
The method described in this paper detects sequence variations in 200- to 300-bp fragments of the blaCTX-M gene, which enables the differentiation of isolates into distinct CTX-M genotypes. The current "gold standard" for precise genotyping and the identification of novel enzymes is complete DNA sequencing of the entire 0.87-kb blaCTX-M gene. To further improve the specificity of dHPLC typing technique and to enable the detection of all novel enzymes by dHPLC, two potential approaches are currently under investigation. First, a dHPLC typing assay with a whole-gene PCR amplicon could be developed; although DNA fragments of up to 1.5 kb have been used for dHPLC-based mutation detection (27), the high level of sequence diversity within the blaCTX-M gene may complicate chromatogram interpretation. Second, and alternatively, two PCR amplicons that cover the entire CTX-M gene could be used and the simultaneous appearance of characteristic peak profiles in two fragments may provide a specific genotype fingerprint.
Since the early 1990s, the rapid expansion of the CTX-M type of ESBLs has created great concern in the public health community worldwide. The prevalence of different CTX-M types of ESBL varies geographically. While the predominant genotypes have been CTX-M-14 and -9 in Spain (15, 31), CTX-M-14 and -3 in China (40), CTX-M-1 in Italy (8), and CTX-M-2 in both Japan and Argentina (30, 33), CTX-M-15 is the most prevalent genotype in the United Kingdom, with an epidemic CTX-M-15-producing strain (strain A) being identified (37).
Our 4-month survey is the first comprehensive prospective study of the genotyping of all isolates with a blaCTX-M-producing ESBL in a large group of teaching hospitals (1,100 beds) in the United Kingdom. Applying the newly developed dHPLC-based genotyping method, we successfully genotyped all 73 blaCTX-M ESBL-producing strains in our sample set. Our data have confirmed the findings of the general screening of isolates referred to the United Kingdom Health Protection Agency's Antibiotic Resistance Monitoring and Reference Laboratory from 42 centers during 2003, that is, that CTX-M-15 is the predominant type of CTX-M ß-lactamase in the United Kingdom (37). The 4-month survey showed that 57/58 (98%) ESBL-producing E. coli strains harbored the blaCTX-M gene (Table 4). This much higher rate of detection of CTX-M-type ESBLs in clinically significant E. coli isolates may suggest that blaCTX-M has been exceptionally successful in both community and hospital settings in the south Birmingham area. Since its first description in 2001 (19), CTX-M-15 has rapidly spread worldwide, including to Asia, Europe, South America, Africa, and the Middle East (11, 12, 24, 26, 29, 34). More alarmingly, CTX-M-15- producing E. coli strains have recently caused reported outbreaks in countries such as Italy, where previously only CTX-M-1 ß-lactamases have been reported (25), and in France and Spain, where the clonal dissemination of CTX-M-15 in hospitals had previously never been reported (22, 28). The availability of high-throughout genotyping by our dHPLC technique will enable the spread of blaCTX-M-15 as well as all the other major outbreak genotypes of CTX-M (blaCTX-M-1, blaCTX-M-2, blaCTX-M-3, blaCTX-M-9, blaCTX-M-12, blaCTX-M-13, blaCTX-M-14, and blaCTX-M-26) to be monitored. The dHPLC genotyping results from our survey have demonstrated the discriminatory power of our technique, as we have found the first reported cases of clinically significant disease caused by CTX-M-14- and CTX-M-1-producing E. coli strains in the United Kingdom. Since TEM-type ESBLs have rarely been encountered in clinical isolates in the United Kingdom, blaTEM was not screened for in this study.
This is the first report demonstrating the application of the dHPLC technology to the genotyping of ß-lactamases and was particularly applied to CTX-M-type ESBLs. The technique has many advantages. It is reliable, and the PCR products are processed in a 96-well autosampler unit and continuously injected onto the column for analysis without any time-consuming premanipulations, such as purification and denaturation. Other major advantages over sequencing are the high-throughput capability (with 3.3 min/injection, 100 samples can be analyzed in 6 h) and low consumables cost (at least 10 times less than the cost of consumables for sequencing). It can be applied to clinical isolates on a large scale inexpensively, and it can also be used to determine the clinical relevance of different genotypes and can be applied in epidemiological studies and surveillance programs. By using dHPLC, the worldwide distribution of blaCTX-M genotypes and their subsequent evolution can be delineated, and furthermore, any novel mutations/insertions/deletions can potentially be detected as a new chromatograph profile.
We thank Anthony Jones, the Functional Genomics Laboratory, University of Birmingham (BBSRC grant 6/JIF 13209), for DNA sequencing and all individuals at Transgenomic, Crewe, United Kingdom, for technical support.
Published ahead of print on 8 January 2007. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»