| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, May 2007, p. 1813-1817, Vol. 51, No. 5
0066-4804/07/$08.00+0 doi:10.1128/AAC.01037-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Sequoia Sciences Inc., 11199 Sorrento Valley Road, Suite H, San Diego, California 92121,1 Sequoia Sciences Inc., 1912 Innerbelt Business Center Drive, Saint Louis, Missouri 63114,2 Center for Biofilm Engineering, Montana State University, Bozeman, Montana 59717-39803
Received 18 August 2006/ Returned for modification 27 December 2006/ Accepted 2 March 2007
| ABSTRACT |
|---|
|
|
|---|
| INTRODUCTION |
|---|
|
|
|---|
Standard susceptibility test methods for determining MICs using planktonic bacteria have been used to select for the most appropriate antibiotic combinations to treat CF airway infections (29). However, this approach has limited relevance as these methods do not consider the challenges posed by biofilms. An antibiofilm strategy is needed to manage the patient's care and to develop new drug leads.
Recently, different methods of determining biofilm susceptibility have been developed to address this problem (7, 12, 20). Biofilm inhibitory concentrations or minimum biofilm eradication concentrations appear in the literature for different antibiotics, which are as expected higher than the corresponding MICs determined by standard methods. In particular, penicillins and cephalosporins are generally ineffective against biofilms produced by these methods (7). However, biofilm inhibitory concentration and minimum biofilm eradication concentration values vary greatly among the different biofilm susceptibility test methods, suggesting that the characteristics of the biofilms are strongly related to the laboratory system used to grow them (20). The discrepancy between these results underscores the difficulty of selecting and developing true biofilm inhibitors as well as compounds that potentiate the activity of antibiotics against biofilms (22). Obviously, not only is it important to grow a bacterial biofilm, but it is also essential to make sure that it is developed in a system that produces antibiotic tolerances similar to those encountered in the clinic.
The present study was performed first to examine the susceptibility of P. aeruginosa biofilm bacteria to ciprofloxacin and tobramycin in the rotating disk reactor (RDR) (4, 14, 34). The susceptibility of biofilm bacteria to ciprofloxacin was of interest because it has been difficult to grow P. aeruginosa biofilms that can tolerate ciprofloxacin at concentrations higher than 1 µg/ml (5), which is the MIC of ciprofloxacin on planktonic P. aeruginosa PAO1 (data not shown). Maximum concentrations of ciprofloxacin in serum and epithelial lining fluid of adults have been shown to be approximately 2 µg/ml (13). This suggests that this concentration of ciprofloxacin is unable to eradicate a chronic biofilm infection. Therefore, a need exists to find a biofilm model that can tolerate concentrations of ciprofloxacin greater than 2 µg/ml.
The RDR was also used to determine the susceptibility of P. aeruginosa biofilms to asiatic acid and corosolic acid (Fig. 1), two compounds isolated from a library of natural products (11). These compounds were identified as biofilm inhibitors during the screening of the library in a high-throughput biofilm assay using 96-well microtiter plates. The biofilm inhibition ability of asiatic acid and corosolic acid analogs has been previously reported by our groups (16, 25). The microtiter plate assay selects for compounds that reduce the formation of biofilms but does not test for potential effects on established biofilms. The RDR assay was chosen as a basis for a secondary screen that can assess the efficacy of a compound to either reduce mature biofilms alone or potentiate the activities of antibiotics. An important goal of this project was to evaluate asiatic acid and corosolic acid for their potential to enhance the susceptibility of established P. aeruginosa biofilm bacteria to tobramycin treatment.
|
| MATERIALS AND METHODS |
|---|
|
|
|---|
RDR biofilm experiments. The RDR (Biosurface Technologies Corporation, Bozeman, MT) consists of a 1-liter glass beaker fitted with a drain spout. The bottom of the vessel contains a magnetically driven rotor with six 1.27-cm-diameter coupons. The coupons can be made of various materials determined by system requirements such as stainless steel or polyurethane. For the purposes of these experiments, the coupons were constructed from polystyrene. This surface was chosen to be consistent with initial high-throughput screening tests, which utilized 96-well polystyrene microtiter plates. The rotor consisted of a star-head magnetic stir bar upon which a disk was affixed to hold the coupons. The vessel with the stir bar was placed on a stir plate and rotated at approximately 200 rpm. A nutrient solution (AB trace medium with 0.3 mM glucose [18]) was added through a stopper in the top of the reactor at a flow rate of 3 ml/min. The reactor volume was approximately 180 ml, varying slightly between reactors depending on the placement of the drain spout and the rotational speed of the rotor. At a volume of 180 ml, the hydraulic residence time of nutrient solutions in the reactors was 60 min. The reactors were operated at room temperature (ca. 26°C).
For each test, two RDRs were operated in parallel, with one receiving the test compound and the other serving as an untreated control. The RDRs were sterilized by autoclaving and then filled with sterile medium and inoculated with P. aeruginosa strain PAO1 per the ASTM method (designation E-2196-02). The reactors were then incubated at room temperature in batch mode (no medium flow) for a period of 24 h, after which flow was initiated for an additional 24-h incubation. Fluid shear was maintained throughout the experiments including batch incubation, flow incubation, and treatment by rotating the stir bar, as described above. Test compounds were dissolved in 10 ml ethanol or 1.0 ml dimethyl sulfoxide to achieve a concentration of 1.8 mg/ml or 18 mg/ml, respectively. After the 48 h of biofilm development described above, the test compound was added to the reactor to achieve a final concentration of approximately 100 µg/ml. Control reactors received 10 ml ethanol or 1.0 ml dimethyl sulfoxide without test compounds. The reactors were then incubated for an additional 24 h in batch (no flow) mode. After this incubation period, the six coupons were removed from each reactor and placed in sterile 12-well polystyrene tissue culture plates with wells containing either 2 ml of a 100-µg/ml tobramycin solution or 2 ml of phosphate-buffered saline (PBS). These plates were incubated at room temperature for 2 hours. The coupons were then rinsed three times by transferring them to plates containing 2 ml of fresh PBS.
For each pair of RDRs run in parallel, four sets of three coupons were obtained: (i) the test compound and tobramycin combined, (ii) the test compound alone, (iii) tobramycin alone (positive control), and (iv) no treatment (negative control). The coupons were placed in 10 ml of PBS and sonicated for 5 minutes to dislodge and disperse biofilm cells. The resulting bacterial suspensions were then serially diluted in PBS and plated on tryptic soy agar plates for enumeration of culturable bacteria. The plates were incubated for 24 h at 37°C before CFU were determined. The results were expressed as the viable cell density per coupon surface area (CFU/cm2).
Experiments were also done with ciprofloxacin at 10 µg/ml applied simultaneously with asiatic acid at either 10 µg/ml, 50 µg/ml, or 100 µg/ml. After 2 hours, the coupons were rinsed and treated as described above.
LD and LR. Viable cell density for each coupon was measured for each set of experiments including treatment and control. For purposes of statistical analysis, each density was log10 transformed to create a log density (LD) value. The LD values for each treatment were averaged across coupons, resulting in a mean LD. For the active treatments, the log reduction (LR) was calculated by subtracting the mean LD for the active treatment from the mean LD for the negative control.
Positive and negative controls.
To monitor the antibiotic resistance of biofilms from experiments performed weeks and months apart, each experiment included a positive control, 100 µg/ml of tobramycin, applied for 2 hours. This tobramycin regimen was established for two reasons. The bactericidal activities of aminoglycoside antibiotics are concentration dependent, so we selected a concentration of tobramycin that was expected to produce a positive but small LR (
2). Secondly, data suggest that 90% of tobramycin concentrations in the lung tissue of CF patients are cleared within 2 hours, so we selected a similar exposure period (19).
The RDR protocol required that the mean LD for negative, untreated control coupons be at least 7.0. The protocol also required that the positive control, tobramycin, produce an LR no greater than 2.0 to ensure a consistent level of tobramycin resistance among the experiments.
Statistical interaction. It was of interest to determine whether the tobramycin effect was enhanced when tobramycin was applied in combination with the test compound: that is, to determine whether there was a positive interaction between the test compound and tobramycin. The quantitative measure of interaction was the negative of the statistical interaction effect conventionally used when conducting an analysis of variance (24): interaction = (mean LD for the test compound and tobramycin) + (mean LD for the test compound alone) + (mean LD for tobramycin alone) (mean LD for negative control). An alternative, mathematically equivalent formula for interaction can be expressed in terms of the LR values: interaction = (LR for the test compound and tobramycin) (LR for the test compound alone) (LR for tobramycin alone).
Many different formulas for quantifying the concept of "synergism" between two treatments appear in the literature. Among those formulas, statistical interaction is a commonly used "effect additive" definition. In the context of evaluating synergism, a positive statistical interaction indicates synergism, a negative interaction indicates antagonism, and a zero interaction, which is the null value for significance testing, indicates absence of either synergism or antagonism. An important special case of synergism, known as potentiation, occurs when the test compound has no effect by itself (LR = 0) and it produces a positive statistical interaction with tobramycin. After the statistical interaction was calculated, a t test was performed as described below to determine if statistical significance was achieved.
Repeatability and statistics. Upper one-tailed t tests were used to test for a statistically significant effect, LR or interaction. The key experiments were repeated two or three times. For those experiments, it was possible to calculate the repeatability standard deviation (Sr) for an effect, where the effect is either LR or interaction. The Sr is the typical difference, sign neglected, between the effect for a randomly chosen experiment and the mean effect over all experiments. A small Sr indicates good repeatability. In some cases, it was possible to use a random-effect analysis of variance to partition the repeatability into within-experiment and between-experiment variances. In testing interactions, the pooled Sr was used. All statistical calculations were performed in either R (http://cran.r-project.org/), Minitab, or MS Excel.
CDC biofilm reactor system. CDC biofilm reactors (Biosurface Technologies Corporation, Bozeman, MT) have been demonstrated to be a repeatable and rugged system for growing bacterial biofilms (12). The CDC biofilm reactor consists of a 1-liter glass vessel with eight polypropylene coupon holders suspended from ported lids. Each vertical rod holds three coupons for a total of 24 coupons per reactor. The operational fluid capacity of the reactor was approximately 350 ml. A fluid shear force of approximately 0.02 N/m2 was generated in the reactor by rotating the stir bar at approximately 125 rpm. Reactor operation for biofilm growth (24-h batch culture/24-h continuous flow) and coupon treatments were identical to those described above for the RDR experiments. During continuous flow biofilm growth, medium was supplied at a rate of 13 ml/min to provide a hydraulic residence time of approximately 27 min. Other experimental conditions (coupons, inoculum, and medium composition) as well as coupon analyses were identical to those described for the RDR experiments.
| RESULTS |
|---|
|
|
|---|
|
|
|
In this study, biofilms treated with tobramycin only were subjected to a 100-µg/ml concentration for 2 hours. Across 20 experiments, the LR ranged from 0.4 to 1.9 with a mean (± standard error of the mean) of 1.2 (±0.09). The Sr of the tobramycin LR values was 0.46, which is lower than that reported from previous antibiofilm tests with the RDR (35) and well within the range (0.3 to 1.5; median, 0.9) of established standard antimicrobial tests (32). In the current study, interaction estimates were also determined for coupons receiving multiple treatments. The pooled Sr for interaction values was 0.58.
Biofilms grown in the CDC reactor system. For biofilms grown in the CDC reactor system, LR values for asiatic acid and corosolic acid were calculated and compared to those for biofilms grown in the RDR system. Asiatic acid and corosolic acid were added to CDC reactors at the same concentrations as in the RDR, at 50 µg/ml and 100 µg/ml, respectively. Asiatic acid and corosolic acid each produced small LR values of 0.8 and 0.7, respectively (data not shown). When combined with tobramycin, asiatic acid at 50 µg/ml produced an LR of 2.9 and corosolic acid at 100 µg/ml produced an LR of 3.7. Although the LR and interaction values are slightly higher for the CDC biofilm than for the RDR biofilm, the CDC results are consistent with the RDR results.
| DISCUSSION |
|---|
|
|
|---|
Asiatic acid and corosolic acid exhibited positive interactions with tobramycin, indicating that these two natural products reduce the tolerance of P. aeruginosa biofilm bacteria to antibiotics. Moreover, when P. aeruginosa biofilms were grown in the presence of 10 µg/ml of asiatic acid, they became more susceptible to 10 µg/ml of ciprofloxacin. These data suggest that asiatic acid and its analogs are compounds that potentiate the activity of antibiotics. These results are very encouraging and suggest further study with asiatic acid and its analogs to establish its activity using a mucoid strain of P. aeruginosa in the RDR system and to determine as well the exact mechanism of action of these compounds.
Ursolic acid, a triterpene closely related to asiatic acid, demonstrated biofilm inhibition in our 96-well plate assay but did not demonstrate a statistical interaction with tobramycin in the RDR model (data not shown). Ursolic acid has been shown to modulate the expression of the cysB gene in Escherichia coli (25). In these studies, a cysB isogenic mutant produced different biofilms than the wild type did. Asiatic acid, the most potent triterpene tested in this study, was also shown to modulate the expression of the cysB gene in microarray experiments (data not shown). CysB is a LysR transcriptional regulator that controls the expression of genes involved in the biosynthesis of cysteine (33). In addition, cysB has been demonstrated to be involved in the control of acid habituation in E. coli and responses to O-acetyl-L-serine and an unknown signal in conditioned medium (28, 31). Thus, the CysB pathway is an interesting potential target pathway of asiatic acid and its analogs in these biofilm assays. Future studies will investigate the mechanism of action of theses compounds by looking at this and other related pathways. It should be noted that these compounds appear to possess a different mechanism of action than that of furanone 56 (15) or garlic extract (3), either of which is known to modulate quorum sensing.
It is interesting that the combination of asiatic acid at 10 µg/ml with tobramycin produced an LR similar to that for the combination of ciprofloxacin at 10 µg/ml with tobramycin. The MICs of asiatic acid and ciprofloxacin are 128 µg/ml and 1 µg/ml, respectively. Since ciprofloxacin at 10 µg/ml was ineffective by itself, its MIC against planktonic bacteria alone did not predict its effectiveness against biofilm bacteria. This further suggests that in addition to its antibacterial properties ciprofloxacin may potentiate the activity of biofilm inhibitors.
The CDC reactor experiments confirmed the interaction between asiatic acid and tobramycin that was observed in the RDR experiments. The CDC reactor and the RDR systems produced biofilms with similar antibiotic tolerances.
Overall, these results were as repeatable as previously reported tests using the RDR system. Even though slightly different conditions were used, these experiments helped to validate the ASTM standard method (E-2196-02) for developing repeatable P. aeruginosa biofilms and the utility of these biofilms for evaluating antimicrobial efficacy. Finally, these data also suggest that our strategy for the identification of new biofilm inhibitors and potentiators appears successful, as the most and least potent compounds in the 96-well plate screen were also the most and least potent compounds tested in the RDR model. Screening in a 96-well plate format and then confirming the activity in the RDR model is a good approach for the discovery and development of biofilm inhibitors and potentiators.
| ACKNOWLEDGMENTS |
|---|
This project was partially supported by the NIH under the STTR grant R42RR016363-02.
| FOOTNOTES |
|---|
Published ahead of print on 12 March 2007. ![]()
| REFERENCES |
|---|
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Clin. Vaccine Immunol. | Clin. Microbiol. Rev. |
|---|---|
| J. Clin. Microbiol. | ALL ASM JOURNALS |