Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, September 2007, p. 3147-3154, Vol. 51, No. 9
0066-4804/07/$08.00+0 doi:10.1128/AAC.00401-07
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Andrew Spaltenstein,2
Michael Hale,5,
Roger Tung,5,
Marty St. Clair,1
Mary Hanlon,3 and
Lawrence Boone1
Metabolic and Viral Diseases CEDD, Departments of Virology,1 Medicinal Chemistry,2 Biochemistry & Analytical Pharmacology,3 Molecular Biochemistry, GlaxoSmithKline, 5 Moore Drive, Research Triangle Park, North Carolina 27709,4 Vertex Pharmaceuticals, Cambridge, Massachusetts5
Received 23 March 2007/ Returned for modification 3 May 2007/ Accepted 2 July 2007
|
|
|---|
|
|
|---|
In an attempt to overcome the challenge of cross-resistance within the PI class, novel inhibitors need to be designed that target critical sites on the protease enzyme that are not targeted by currently used PIs. The goal of drug discovery should involve the identification of inhibitors of a broad spectrum of mutant HIV-1 strains, which are compatible with existing treatments and select unique protease mutations which remain susceptible to other PIs.
Our research has identified novel inhibitors of the HIV protease that possess potent activities against a variety of clinically relevant mutant HIV strains, are compatible with other anti-HIV agents, and have unique resistance profiles. Recently we described a series of novel arylsulfonamide PIs with potent anti-HIV activities against both wild-type and drug-resistant viral strains (18). Additional structural modifications that introduced a tyrosine moiety into the P1 position on the series have led to exceptionally potent compounds. In this article, we describe the in vitro activities of brecanavir (BCV) (Fig. 1), a tyrosyl peptidomimetic with low nanomolar activities against both wild-type and PI-resistant HIV, additive to synergistic activities in combination with other antiretrovirals, and having a unique in vitro resistance profile.
![]() View larger version (7K): [in a new window] |
FIG. 1. Structure of BCV.
|
|
|
|---|
Cell lines and primary cell cultures. MT-4 cells, a human T-cell leukemia virus type 1-transformed human T-cell line (19), were obtained from long-term cultures of samples supplied by B. Larder and maintained as previously described (3). HeLa-CD4-LTR-ß-gal cells (obtained from Michael Emerman through the AIDS Research and Reference Reagent Program, Division of AIDS, NIAID, NIH) were maintained in Dulbecco's modified Eagle's medium with 10% fetal bovine serum (FBS) (catalog no. SH30070.03; HyClone) and under the selective pressure of Geneticin (catalog no. 10131-035; Invitrogen) and hygromycin B (catalog no. 10687-010; Invitrogen). Normal donor peripheral blood mononuclear cells (PBMCs) were isolated from random buffy coats (35 to 40 ml of elutriated whole blood in anticoagulant from HIV-negative donors) received from the American Red Cross, Carolina Division. PBMCs were isolated by density gradient centrifugation over lymphocyte separation medium (Mediatech catalog no. 25-072-CL) and stimulated by the addition of 5 µg/ml phytohemagglutinin (PHA) (catalog no. L9017; Sigma) for 24 to 48 h (3).
Virus strains. HIV-1 strain IIIB was derived from cell-free supernatants of cultures of the chronically infected cell line H93B (H9/human T-cell leukemia virus type 1 strain IIIB). HIV-1 strain HXB2, derived from the molecular clone pHXB2-D (8), was obtained from B. Larder. High-titer HIV-1 Ba-L was purchased from Advanced Biotechnologies and expanded in PHA-activated PBMCs (see above), and titers in PBMCs were determined. Viral input was determined by selecting a dilution that gave a RT signal within the linear range of the assay and a signal-to-background ratio of 20 to 30.
MT-4 cell assay. Antiviral HIV activity and compound-induced cytotoxicity were measured in parallel by means of a methanethiosulfonate tetrazolium reagent (MTS)-based procedure in the HTLV-1-transformed cell line MT-4. Aliquots of the test compounds were serially diluted in RPMI 1640 medium (catalog no. 22400; Invitrogen), 10% [vol/vol] FBS, and 10 µg/ml gentamicin (catalog no. 15750-060; Invitrogen) in 96-well plates. Exponentially growing MT-4 cells were harvested and centrifuged at 192 x g for 10 min. Cell pellets were resuspended in fresh medium (RPMI 1640, 20% [vol/vol] FBS, 20% [vol/vol] interleukin-2 [catalog no. 801017; Zeptometrix], and 10 µg/ml gentamicin) to a density of 5 x 105 cells/ml. Cell aliquots were infected by the addition of HIV-1 strain IIIB, diluted to give a viral inoculum of 100 x 50% tissue culture infective doses per well. A similar cell aliquot was diluted with medium to provide a mock-infected control. Cell infection was allowed to proceed for 1 h at 37°C in a tissue culture incubator with humidified 5% CO2 atmosphere. After incubation, the virus-treated cell suspensions were diluted sixfold with fresh medium, and 125 µl of the cell suspension was added to each well of the plate containing prediluted compound. Plates were then placed in a tissue culture incubator at 37°C with humidified 5% CO2 for 5 days. HIV-induced cytopathic effects were assessed by the CellTiter96 MTS staining method (catalog no. G3581; Promega, Madison, WI). The optical density at 492 nm was measured by using a microplate absorbance reader (catalog no. 20-300; Tecan, Research Triangle Park, NC).
Modified MT-4 cell assay to assess combination antiviral activity. For combination testing, aliquots of BCV were serially diluted vertically in a 96-well master assay plate in RPMI 1640 medium, 10% [vol/vol] FBS, and 10 µg/ml gentamicin. Approved HIV inhibitors were diluted horizontally across separate master assay plates. Checkerboard-style dilutions were arranged by combining aliquots from both the horizontally and vertically diluted master plates into daughter plates, so that every concentration of BCV was tested in the presence and absence of every concentration of the approved HIV inhibitor. Anti-HIV activity tests were performed in a minimum of triplicate assays of each combination. Cell infection, incubation, and MTS staining were carried out by the same methods used in the standard MT-4 cell assay.
Antiviral assay in the presence of human serum and human serum proteins.
Exponentially growing MT-4 cells were harvested and centrifuged at 400 x g for 5 min at room temperature, and the cell pellet was resuspended in RPMI 1640 medium, 10% [vol/vol] FBS, supplemented with 100 U/ml penicillin, 100 µg/ml streptomycin (catalog no. 15140-122; Invitrogen), and 2 mM L-glutamine (catalog no. 25030-081; Invitrogen) in the presence or absence of human serum or human serum proteins. The MT-4 cell suspension was batch infected with HIV-1 HXB2 at a multiplicity of infection of 0.0001 (100 50% tissue culture infective doses per 1 x 106 cells) in a volume of 0.5 ml and a cell density of 9.6 x 107 cells/ml. Infection was allowed to proceed for 1 h at 37°C in a tissue culture incubator with a humidified atmosphere of 5% CO2 in air. Following infection, cells were diluted in corresponding protein-supplemented medium and plated on a 96-well plate containing serially diluted BCV, DRV, or TPV in the presence of 10% or 40% FBS, 10% to 40% human serum (catalog no. H1388; Sigma, St. Louis, MO), 40 mg/ml human serum albumin (catalog no. A8763; Sigma, St. Louis, MO), 1 mg/ml
1-acid glycoprotein (catalog no. G9885; Sigma, St. Louis, MO), or combinations of protein treatments. The final MT-4 cell density was 4 x 104 cells per well in a volume of 200 µl. After 5 days of incubation, the 50% effective concentration (EC50) was determined by a cell viability assay using the MTS reagent with optical density measured by a Vmax microplate reader (Molecular Devices, Sunnyvale, CA). The aim of these measurements was to determine the effective concentration of drug in human serum, generally considered to be the concentration of free drug in solution (21). It is not practical to measure the effect of drug in 100% human serum due to cellular toxicity, but concentrations up to 40% can be used. Extrapolation of the data to 100% serum is necessary for in vitro-to-in vivo scaling. Extrapolation can be done with greater confidence if we can predict with certainty a linear relationship between the concentration of free drug and the total serum protein concentration. If the total, free, and bound concentrations of drug are represented as T, F, and B, respectively, P is the total concentration of protein capable of binding drug, and Pf is unbound protein, then.
![]() | (1) |
1-acid glycoprotein) to
500 µM (human serum albumin) (21), and the inhibitors used are present in concentrations
1,000-fold lower. Thus, P is >>B, and in equation 1 we can substitute Pf = P, which gives
![]() | (2) |
![]() View larger version (14K): [in a new window] |
FIG. 2. Effect of human serum on the antiviral activity of BCV (closed circles) or darunavir (filled squares) in vitro.
|
Drug combinations (deviations from dose-wise additivity). EC50s were calculated by curve fitting data to the Hill equation (12), using a nonlinear least-squares curve-fitting program based on the Marquardt-Levenberg algorithm (16). The interaction of each pair of compound combinations was analyzed by the methods described by Selleseth et al. (24), which provide an estimation of the strength of any interaction and of its statistical significance. Synergy and antagonism are defined as deviations from dosewise additivity, which results when two drugs interact as if they were the same drug. Values for average deviation from additivity in the range of –0.1 to –0.2 indicate weak synergy and values between –0.2 and –0.5 indicate strong synergy of interaction. Conversely, values of +0.1 to +0.2 indicate that a weak antagonism exists between the treatments.
HeLa-CD4 MAGI antiviral assay. Compound anti-HIV-1 activity was determined in HeLa-CD4-LTR-ß-gal (14) by the method of Ferris et al. (7).
HIV protease enzymology. Inhibition constant (Ki) values were determined from a continuous fluorescence activity assay for HIV-1 protease or calculated from the bimolecular rate constants (k1) for association of enzyme with inhibitor and the values for the first-order rate constants (k–1) for the dissociation of enzyme and inhibitor (10).
Phenotypic susceptibilities of 94 viruses obtained from PI-experienced patients. One hundred nine viruses obtained from PI treatment-experienced patients were studied. Ninety-four of these viruses were selected based on the presence of major protease resistance-associated mutations (RAMS) at residues 30 (n = 3), 32 (n = 9), 33 (n = 31), 46 (n = 60), 47 (n = 6), 48 (n = 10), 50 (V, n = 5; L, n = 5), 82 (n = 48), 84 (n = 36), 88 (n = 7), and 90 (n = 44) (Table 1). Viruses were selected so that single, double, triple and multiple mutations of different combinations were included. Sequence analysis and drug susceptibility testing were performed at Monogram Biosciences, Inc., South San Francisco, CA. Viral DNA sequences were determined by a thermocycling method using fluorescent dye-labeled dideoxynucleotide chain terminator chemistry. Resistance-associated mutations were classified based on International AIDS Society resistance tables (13). The mean percent inhibition of each drug concentration was determined and used to calculate the EC50. The n-fold change (FC) in drug susceptibility was determined by comparing the EC50 for the subject virus to the EC50 for the drug-sensitive reference virus containing the protease and RT sequences of the NL4-3 strain of HIV-1.
|
View this table: [in a new window] |
TABLE 1. Major HIV-1 protease mutations associated with PI resistance identified in clinical-isolate viruses
|
|
|
|---|
|
View this table: [in a new window] |
TABLE 2. Activities of BCV against wild-type HIV
|
|
View this table: [in a new window] |
TABLE 3. Anti-HIV-1 Ba-L activities of BCV and approved PIs in PBMC
|
|
View this table: [in a new window] |
TABLE 4. Effect of human serum on antiviral activity of BCV, DRV, or TPV in MT-4 cells
|
1-acid glycoprotein (AAG) on the potency of brecanavir or DRV was determined by methods similar to those used in experiments testing the effects of human serum (Table 5). HSA (40 mg/ml) and/or 1 mg/ml AAG resulted in a 3.7- or 7.6-fold increase in the EC50 of BCV, respectively. The combination of HSA and AAG resulted in an 8.2-fold increase in the EC50 of BCV. For DRV, there was a 1.3- or 8.8-fold increase in EC50 when tested with either HSA or AAG alone, respectively. When tested in the presence of both HSA and AAG, there was an 8.7-fold increase in the EC50 for DRV. Since the concentrations chosen were those reported for human serum, these results are in excellent agreement with values obtained by addition of whole serum (Table 4). |
View this table: [in a new window] |
TABLE 5. Effect of 1-acid glycoprotein or human serum albumin on antiviral activity of BCV or DRV
|
|
View this table: [in a new window] |
TABLE 6. Inhibition of HIV-1 strain IIIB by BCV in combination with other approved anti-HIV agents in MT-4 cells
|
![]() View larger version (8K): [in a new window] |
FIG. 3. Isobolograms of the inhibition of HIV-1 by BCV in combination with several marketed anti-HIV agents in MT-4 cells. (a) In combination with PIs (PIs); (b) in combination with NRTIs; (c) in combination with NNRTIs. FIC, fractional inhibitory concentration.
|
![]() View larger version (29K): [in a new window] |
FIG. 4. Phenotypic susceptibilities to atazanavir, amprenavir, tipranavir, darunavir, and BCV of 94 PI-resistant clinical isolate viruses obtained from PI-experienced patients.
|
|
View this table: [in a new window] |
TABLE 7. Anti-HIV-1 EC50s of several PIs against 94 clinical-isolate viruses
|
In general, the viruses with more protease mutations resulted in larger increases in EC50s than viruses with fewer protease mutations. The 10 patient viruses with the highest FC with BCV (mean FC = 41.9; range, 8.9 to 112; median, 13) had a mean of 4.4 major PI RAMs (range, 3 to 6; median, 4) per isolate and a mean of 17.8 total protease mutations (range, 12 to 22; median, 17) per isolate. Two isolates that had an FC for BCV of >100 had genotypes containing the BCV-associated resistance mutations, M46I and A71V, that were identified by in vitro resistance selection with HIV-1 strain HXB2 (26). Against isolates containing 0 to 3 major PI RAMs, BCV had <3 FC compared to the reference virus and with isolates containing 4 or 5 RAMs had FCs of 10 or 48, respectively (Fig. 5). Against isolates containing 0 to 2 BCV-associated mutations identified during in vitro serial virus passage (26), there was a 1.5- to 6.2-fold change in the activity of BCV (BCV EC50 range = 0.1 to 10.2 nM) compared to that of the wild-type reference virus.
![]() View larger version (6K): [in a new window] |
FIG. 5. Relationship between number of major protease resistance mutations and n-fold change of BCV activity. Number of isolates studied per group was 2, 13, 19, 34, 20, 5, or 1 for isolate groups having 0, 1, 2, 3, 4, 5, or 6 PI resistance mutations per isolate, respectively.
|
|
|
|---|
Recently we documented our efforts to optimize the arylsulfonamide scaffold of PIs (17). This work resulted in the discovery of BCV, which exhibited exceptionally high potency (Ki = 15 fM) against the wild-type HIV protease enzyme. In a competitive binding assay (10), BCV was found to be 2,000-fold more potent than APV (APV Ki = 36 pM) (10) and 10-fold more potent than DRV (DRV Ki = 147 fM) (unpublished results). We also determined the Ki value of amprenavir by inhibition of enzyme activity using a fluorescent peptide substrate (10) and found the Ki value (57 pM) to be very similar to the value determined with the competitive binding assay. Another newer PI, TPV, was reported to have a Ki similar to that of amprenavir (8 pM) (25). This value was also determined with a fluorescent peptide substrate and suggests that TPV is several orders of magnitude weaker than BCV.
In the present study, we have shown that BCV has subnanomolar potency against several wild-type laboratory HIV strains in both MT-4 cells and PBMCs. Compared to published anti-HIV strain IIIB activities in MT-4 cells, BCV is more than 270- or 850-fold more potent than the PIs APV or TPV, respectively (20), and more than 10-fold more potent than the structurally similar PI, DRV (4). BCV also potently suppressed the virus strain Ba-L, with nearly equivalent activity seen with strains IIIB and HXB2. A comparison of the activity of BCV with those of other PIs against strain Ba-L in PBMCs showed that BCV was significantly more potent than any of the other PIs tested.
Like other PIs, BCV was not active against HIV in the HeLa-CD4 cell assay. The absence of activity in the HeLa-CD4 cell assay is a common characteristic of PIs, since this assay has only a single round of infection and has little or no production of progeny viral particles, where PIs would be active during maturation.
No cellular toxicity was observed in several cell lines up to the highest concentration of BCV tested (25 µM), which indicates a high selectivity index of >55,000.
The in vitro interaction of BCV with other antivirals was determined with MT-4 cells. In combination with the marketed anti-HIV-1 agents, the activity of BCV was found to be additive to or synergistic with the activities of the other agents. It is not clear why results of in vitro tests of BCV in combination with one member of a drug class would be different from those with others in the same drug class. For example, activity of BCV in combination with EFV was additive, whereas that in combinations with either NVP or DLV was synergistic. The differences seen in the interaction of BCV and various members of the NNRTI class may be a matter of degree. By our definition of synergy, a value of –0.1 for average deviation from additivity would indicate a weak synergy for the combination. For combinations of EFV and BCV, the value of –0.1 achieves the minimum value that would indicate synergy, but it fails to achieve statistical significance (P = 0.08). The greatest value of in vitro combination studies is to identify combinations that result in antagonistic antiviral effects and exclude such combinations from clinical consideration. There are many other important factors that also must be considered in the selection of combination therapeutics, including pharmacokinetics, interactions with drug-metabolizing enzymes, and toxicities. These factors can be evaluated only in clinical trials.
BCV is approximately 98% bound to serum proteins (9). Despite this high level of protein binding, BCV retains potent activity when antiviral assessments are performed in the presence of physiological levels of human proteins. In the absence of added human serum, the in vitro potency of DRV was eightfold less than the potency of BCV. In the presence of 40% human serum, the highest concentration tested, the in vitro potency of DRV was 5.8-fold less than the potency of BCV. Protein binding often increases the half-life of the drug by reducing free concentrations that are available for metabolism or excretion. However, protein binding and the resultant reduction of free drug also attenuate the pharmacology of the drug (i.e., antiviral activity in this case). Therefore, these current in vitro studies may serve as a means to estimate the antiviral effect of total drug concentrations determined in vivo in patient plasma.
In testing against clinical isolate viruses derived from PI-experienced patients, BCV has shown greater in vitro potency than APV, IDV, LPV, ATV, TPV, and DRV and a lower FC than all other PIs tested except for a FC similar to those of TPV and DRV. Due to the small scale of the clinical isolate data set, it was difficult to ascribe BCV resistance of the clinical isolates to specific mutational patterns.
In summary, the present study demonstrates the following in vitro preclinical properties of BCV. (i) It has potent subnanomolar in vitro antiretroviral activity against several laboratory HIV strains and is significantly more potent than other PIs tested against viruses using the CCR5 coreceptor. (ii) In the presence of added human serum or serum proteins, BCV retains a potency advantage over other PIs. (iii) It is additive or synergistic when tested in combination with other antiretrovirals. (iv) It exhibited mean subnanomolar potencies against a panel of viruses from PI-experienced patients.
We acknowledge Monogram Biosciences, Inc., South San Francisco, CA, for performing the sequence analysis and Phenosense assays. We also acknowledge Steve Novick for assistance in data analysis.
Published ahead of print on 9 July 2007. ![]()
Present address: Adnexus Therapeutics, Waltham, MA. ![]()
Present address: AstraZeneca Pharmaceuticals, Waltham, MA. ![]()
Present address: Concert Pharmaceuticals, Lexington, MA. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»