Previous Article | Next Article ![]()
Antimicrobial Agents and Chemotherapy, August 2008, p. 2905-2908, Vol. 52, No. 8
0066-4804/08/$08.00+0 doi:10.1128/AAC.00166-08
Copyright © 2008, American Society for Microbiology. All Rights Reserved.

Reference Centre for Detection of Antimicrobial Resistance, Department of Microbiology and Infection Control, University Hospital of North Norway, Tromsø, Norway,1 Department of Cellular and Molecular Medicine, University of Bristol, School of Medical Sciences, University Walk, Bristol BS8 1TD, United Kingdom,2 Department of Medical Microbiology, University of Cardiff, Heath Park, Cardiff CF14 4XN, United Kingdom,3 JMI Laboratories, North Liberty, Iowa 523174
Received 5 February 2008/ Returned for modification 24 March 2008/ Accepted 4 June 2008
|
|
|---|
|
|
|---|
The blaVIM-7 gene was amplified from Pseudomonas aeruginosa 07-406 (14) by PCR using the primers VIM-7F 5'-GAATTCCATATGTTTCAAATTCGCAGCTTTCTGGTTG-3' and VIM-7R 5'-CGCGGATCCTTACTCGGCCACCGGGCGTACTTTG-3' to introduce NdeI and BamHI restriction sites, respectively (underlined). The PCR product was cloned into the T7 expression vector pET-26b (Novagen) and transformed into E. coli BL21 (DE3) (Novagen). Protein expression was induced in Terrific broth (Sigma-Aldrich) at 37°C by using 1 mM isopropyl-1-thio-β-D-galactopyranoside.VIM-7 was purified from the periplasm according to the method of Avison et al. (1) with modifications including 50 mM Tris (pH 7.5), 100 µM ZnCl2, 0.02% (wt/vol) sodium azide used as the buffer system, and Q-Sepharose and Superdex 75 matrices (GE Healthcare) for the ion-exchange and gel filtration steps, respectively. In addition, blaVIM-2 was amplified from P. aeruginosa 81-11963 (15) by using primers VIM-2F 5'-GGAATTCCATATGTTCAAACTTTTGAGTAAGTTATTGG and VIM-2R 5'-CGCGGATCCCTACTCAACGACTGAGCGATTTGTG (NdeI and BamHI restriction sites underlined), and cloned, expressed and purified as described for VIM-7. The concentrations of VIM-7 and VIM-2 were determined from the absorbance at 280 nm by using extinction coefficients of 26,930 M–1 cm–1 (calculated from the amino acid sequence [www.expasy.ch]) and 28,500 M–1 cm–1 (2), respectively. Protein preparations were estimated to be >99% pure, as judged by sodium dodecyl sulfate-polyacrylamide gel electrophoresis.
Steady-state kinetic measurements were performed at 25°C in UV-transparent 96-well plates (BD Biosciences) in a SpectraMax 190 spectrophotometer (Molecular Devices) in 50 mM sodium cacodylate (pH 7.0), 100 µM ZnCl2, and 0.1 mg/ml bovine serum albumin. A parallel investigation of nitrocefin hydrolysis by VIM-7 in 1-ml cuvettes yielded kinetic parameters identical to those obtained with 96-well plates (data not shown). The wavelengths and extinction coefficients used were those previously reported (7, 12) excepting those for ertapenem (
, –6,920 M–1 cm–1;
, 300 nm). For 96-well plates, extinction coefficients were recalculated from standard curves constructed from absorbance measurements of serially diluted unhydrolyzed and completely hydrolyzed substrates. Km (µM) and kcat (s–1) were determined from plots of initial velocity of hydrolysis against substrate concentration. For penicillin G, ampicillin, carbenicillin, piperacillin, aztreonam, and clavulanic acid, the Km was determined as the Ki by measuring inhibition of hydrolysis of the reporter substrate nitrocefin across a range of substrate and nitrocefin concentrations. Ki values were determined by a global (shared-parameter) fit of these multiple data sets to a competitive inhibition model. All kinetic data were fitted by nonlinear regression as implemented in the Prism program (GraphPad Software, San Diego, CA).
Table 1 lists the steady-state kinetic parameters kcat, Km, and kcat/Km for hydrolysis of a series of substrates by VIM-7 and compares these data with published values for VIM-1 and VIM-2 (2, 3) and data from our own investigations of cloxacillin, ertapenem, and clavulanic acid hydrolysis by VIM-2 (this study). Note that we also investigated hydrolysis of nitrocefin and cephaloridine by VIM-2 under our conditions and found no major discrepancies with previously published values (2). VIM-7 hydrolyzed all the tested β-lactams except aztreonam, for which only very weak interaction with enzyme was observed. VIM-7 efficiently hydrolyzes all penicillins and carbapenems (kcat/Km > 106 M–1 s–1) with the exception of ertapenem, while activity against cephalosporins varies by almost four orders of magnitude (activity against cefepime, 9.1 x 103 M–1 s–1; activity against nitrocefin, 2.6 x 107 M–1 s–1). The β-lactamase inhibitors tazobactam, sulbactam, and clavulanic acid are hydrolyzed with lower efficiencies, due primarily to high Km values. Activity against penicillins, and to some extent carbapenems, arises both from high kcat and, with the exception of that for cloxacillin, relatively tight (10 to 100 µM) Km values. Comparison with VIM-1 and VIM-2 (Table 1) suggests three general trends in overall catalytic efficiency. That for penicillins is VIM-7 > VIM-2 > VIM-1, that for cephalosporins is VIM-1
VIM-2 > VIM-7, and that for carbapenems is VIM-7
VIM-2 > VIM-1. The trend in kcat/Km values for VIM-7 broadly follows that observed for MICs determined with E. coli DH5
transformed with the pMATVIM-7 plasmid (14) in that penicillin MICs are generally high, the value for imipenem is higher than that for meropenem, and there is little effect on aztreonam susceptibility.
|
View this table: [in a new window] |
TABLE 1. Steady-state kinetic parameters of the purified VIM-7 in comparison with those of the other variants, VIM-1 and VIM-2a
|
A homology model of VIM-7 (Fig. 1) constructed using the EsyPred3D server (www.fundp.ac.be/urbm/bioinfo/esypred) (6) based on the structure of reduced VIM-2 (5) suggests that four residues (positions 68, 218, 224, and 228) might have an impact upon substrate binding and hydrolysis. The Pro-68 Ser and Tyr-218 Phe substitutions are unique to VIM-7, while VIM-7 shares the Tyr-224 His substitution with VIM-1, VIM-4, and VIM-12 only. Arg-228 is present in all VIM enzymes other than VIM-1 and VIM-12. Pro-68, a well-conserved residue in subclass B1 MBLs, forms an H bond to the Zn2 ligand His-263 through its main-chain carbonyl oxygen, and although the replacement of this residue by Ser will likely increase flexibility in this region of the protein, our model does not suggest that this interaction will be abolished. VIM-2 Tyr-218 participates in an H-bonding network, involving Asp-84, that is present in some form in all MBLs of known structure and connects the two Zn2+ sites (8). In the related IMP enzymes, enhancing these interactions through the Phe-218 Tyr mutation promotes hydrolysis of so-called type II β-lactam substrates with neutral or charged substituents at the C-2/C-3 (R2) position (10, 11). Our model suggests that in VIM-7, replacement of Tyr-218 by Phe will disrupt this network (Fig. 1). Consistent with this hypothesis, VIM-7 indeed displays a loss of activity against type II cephalosporins bearing charged cyclic substituents (ceftazidime, cefepime, and cephaloridine).
![]() View larger version (37K): [in a new window] |
FIG. 1. Stereo view of VIM active sites. The figure shows VIM-2 active site (atom colors as standard [carbon green, oxygen red, nitrogen blue, sulfur yellow] excepting alpha-carbon rainbow ramped by sequence position; zinc ions are rendered as gray, and water molecules are rendered as red spheres). Residues are numbered according to the BBL standard numbering scheme (4). Metal-ligand and hydrogen bonds are shown as thin gray lines. Positions showing variation between VIM-1, VIM-2, and VIM-7 (68, 218, 224, and 228) are labeled in cyan. Side chains of Ser-68, Phe-218, and His-224 of the VIM-7 homology model are shown with carbon atoms rendered in cyan. This figure was rendered using Pymol (http://www.pymol.org).
|
In summary, our kinetic data show that, despite possessing a number of alterations close to the active site, VIM-7 effectively hydrolyzes both penicillin and carbapenem substrates but displays some diminished activity against cephalosporins, particularly those with bulky, charged C-3 substituents. Analysis of a VIM-7 homology model suggests that these effects might arise primarily from the Tyr-218 Phe substitution that distinguishes this enzyme from other family members. Further structural and mutagenic studies will be required to confirm this hypothesis.
We thank Jackie Martin for expert advice on protein purification.
Published ahead of print on 16 June 2008. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»